0
Collection("CLMS_CORINE")
| id: |
'CLMS_CORINE', |
| title: |
'CORINE Land Cover', |
| description: |
'The CORINE Land Cover (CLC) inventory was initiated in 1985 (reference year 1990). Updates have been produced in
2000, 2006, 2012, and 2018. It consists of an inventory of land cover in 44 classes. CLC uses a Minimum Mapping
Unit (MMU) of 25 hectares (ha) for areal phenomena and a minimum width of 100 m for linear phenomena. The time
series are complemented by change layers, which highlight changes in land cover with an MMU of 5 ha. Different
MMUs mean that the change layer has higher resolution than the status layer. Due to differences in MMUs the
difference between two status layers will not equal to the corresponding CLC-Changes layer. If you are interested
in CLC-Changes between two neighbour surveys always use the CLC-Change layer.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[1986-01-01 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['Land-cover'
, 'LCL'
, 'CORINE'
, 'CLMS'
], |
| license: |
'other', |
| constellation: |
'Sentinel-2, LANDSAT, SPOT-4/5, IRS P6 LISS III', |
| instruments: |
[], |
| platform: |
'S2, L5, L7, L8, SPOT4, SPOT5', |
|
|
1
Collection("CLMS_GLO_DMP_333M")
| id: |
'CLMS_GLO_DMP_333M', |
| title: |
'10-daily Dry Matter Productivity 333M', |
| description: |
'Dry matter Productivity (DMP) is an indication of the overall growth rate or dry biomass increase of the vegetation
and is directly related to ecosystem Net Primary Productivity (NPP), however its units (kilograms of gross dry
matter per hectare per day) are customized for agro-statistical purposes. Compared to the Gross DMP (GDMP), or its
equivalent Gross Primary Productivity, the main difference lies in the inclusion of the autotrophic respiration.
Like the FAPAR products that are used as input for the GDMP estimation, these GDMP products are provided in Near
Real Time, with consolidations in the next periods, or as offline product.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-01-10 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['Land'
, 'Dry-matter-productivity'
, 'DMP'
, 'OLCI'
, 'PROBA-V'
, 'Sentinel-3'
], |
| license: |
'other', |
| constellation: |
'Sentinel-3', |
| instruments: |
['OLCI'
, 'PROBA-V'
], |
|
|
2
Collection("CLMS_GLO_FAPAR_333M")
| id: |
'CLMS_GLO_FAPAR_333M', |
| title: |
'Global 10-daily Fraction of Absorbed PAR 333m', |
| description: |
'The FAPAR quantifies the fraction of the solar radiation absorbed by plants for photosynthesis. It refers only to
the green and living elements of the canopy. The FAPAR depends on the canopy structure, vegetation element optical
properties, atmospheric conditions and angular configuration. To overcome this latter dependency, a daily integrated
FAPAR value is assessed. FAPAR is very useful as input to a number of primary productivity models and is recognized
as an Essential Climate Variable (ECV) by the Global Climate Observing System (GCOS). The product at 333m resolution
is provided in Near Real Time and consolidated in the next six periods.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-01-10 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['Land'
, 'Fraction-of-absorbed-PAR'
, 'FAPAR'
, 'OLCI'
, 'PROBA-V'
, 'Sentinel-3'
], |
| license: |
'other', |
| constellation: |
'Sentinel-3', |
| instruments: |
['OLCI'
, 'PROBA-V'
], |
|
|
3
Collection("CLMS_GLO_FCOVER_333M")
| id: |
'CLMS_GLO_FCOVER_333M', |
| title: |
'Global 10-daily Fraction of Vegetation Cover 333m', |
| description: |
'The Fraction of Vegetation Cover (FCover) corresponds to the fraction of ground covered by green vegetation.
Practically, it quantifies the spatial extent of the vegetation. Because it is independent from the illumination
direction and it is sensitive to the vegetation amount, FCover is a very good candidate for the replacement of
classical vegetation indices for the monitoring of ecosystems. The product at 333m resolution is provided in
Near Real Time and consolidated in the next six periods.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-01-10 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['Land'
, 'Fraction-of-vegetation-cover'
, 'OLCI'
, 'PROBA-V'
, 'Sentinel-3'
], |
| license: |
'other', |
| constellation: |
'Sentinel-3', |
| instruments: |
['OLCI'
, 'PROBA-V'
], |
|
|
4
Collection("CLMS_GLO_GDMP_333M")
| id: |
'CLMS_GLO_GDMP_333M', |
| title: |
'10-daily Gross Dry Matter Productivity 333M', |
| description: |
'Gross dry matter Productivity (GDMP) is an indication of the overall growth rate or dry biomass increase of the
vegetation and is directly related to ecosystem Gross Primary Productivity (GPP), that reflects the ecosystem's
overall production of organic compounds from atmospheric carbon dioxide, however its units (kilograms of gross dry
matter per hectare per day) are customized for agro-statistical purposes. Like the FAPAR products that are used as
input for the GDMP estimation, these GDMP products are provided in Near Real Time, with consolidations in the next
periods, or as offline product.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-01-10 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['Land'
, 'Gross-dry-matter-productivity'
, 'GDMP'
, 'GPP'
, 'OLCI'
, 'PROBA-V'
, 'Sentinel-3'
], |
| license: |
'other', |
| constellation: |
'Sentinel-3', |
| instruments: |
['OLCI'
, 'PROBA-V'
], |
|
|
5
Collection("CLMS_GLO_LAI_333M")
| id: |
'CLMS_GLO_LAI_333M', |
| title: |
'Global 10-daily Leaf Area Index 333m', |
| description: |
'LAI was defined by CEOS as half the developed area of the convex hull wrapping the green canopy elements per unit
horizontal ground. This definition allows accounting for elements which are not flat such as needles or stems.
LAI is strongly non linearly related to reflectance. Therefore, its estimation from remote sensing observations
will be scale dependant over heterogeneous landscapes. When observing a canopy made of different layers of vegetation,
it is therefore mandatory to consider all the green layers. This is particularly important for forest canopies where
the understory may represent a very significant contribution to the total canopy LAI. The derived LAI corresponds
therefore to the total green LAI, including the contribution of the green elements of the understory. The product at
333m resolution is provided in Near Real Time and consolidated in the next six periods.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-01-10 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['Land'
, 'Leaf-area-index'
, 'LAI'
, 'OLCI'
, 'PROBA-V'
, 'Sentinel-3'
], |
| license: |
'other', |
| constellation: |
'Sentinel-3', |
| instruments: |
['OLCI'
, 'PROBA-V'
], |
|
|
6
Collection("CLMS_HRVPP_ST")
| id: |
'CLMS_HRVPP_ST', |
| title: |
'Seasonal Trajectories, 10-daily, ST projection', |
| description: |
'The Seasonal Trajectories product is a filtered time series of Plant Phenology Index (PPI), with regular time step, part of the Copernicus Land Monitoring Service (CLMS) HR-VPP product suite.
Plant Phenology Index (PPI) is a physically based vegetation index that is optimized for monitoring vegetation phenology and has a linear relationship with green leaf area index.
The Seasonal Trajectories (ST) products are derived from a function fitting of the time series of the PPI vegetation index and hence provide a filtered PPI time series, with regular 10-day time step, together with related quality information (QFLAG).
The PPI Seasonal Trajectories are derived from the PPI vegetation index and hence based on Copernicus Sentinel-2 satellite observations.
The ST products are made available as a set of raster files with 10m and 100m resolution, in ETRS89/LAEA projection corresponding to the High Resolution Layers tiling grid, for those tiles that cover the EEA38 countries and the United Kingdom, and for the period from 2017 until today, with yearly updates.
These Seasonal Trajectories are part of the pan-European High Resolution Vegetation Phenology and Productivity (HR-VPP) component of the Copernicus Land Monitoring Service (CLMS).
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[None
, None
]
]
}
}, |
| keywords: |
['Land'
, 'Plant-phenology-index'
, 'Phenology'
, 'Vegetation'
, 'Sentinel-2'
, 'S2A'
, 'S2B'
, 'S2C'
], |
| license: |
'other', |
| links: |
[{
'href': 'https://land.copernicus.eu/en/technical-library/hr-vpp-data-access-manual/@@download/file'
,
'rel': 'describedby'
,
'type': 'application/pdf'
,
'title': 'User Manual'
}
], |
| constellation: |
'Sentinel-2', |
| instruments: |
[], |
| platform: |
'S2A,S2B,S2C', |
|
|
7
Collection("CLMS_HRVPP_ST_LAEA")
| id: |
'CLMS_HRVPP_ST_LAEA', |
| title: |
'Seasonal Trajectories, 10-daily, LAEA projection', |
| description: |
'The Seasonal Trajectories product is a filtered time series of Plant Phenology Index (PPI), with regular time step, part of the Copernicus Land Monitoring Service (CLMS) HR-VPP product suite.
Plant Phenology Index (PPI) is a physically based vegetation index that is optimized for monitoring vegetation phenology and has a linear relationship with green leaf area index.
The Seasonal Trajectories (ST) products are derived from a function fitting of the time series of the PPI vegetation index and hence provide a filtered PPI time series, with regular 10-day time step, together with related quality information (QFLAG).
The PPI Seasonal Trajectories are derived from the PPI vegetation index and hence based on Copernicus Sentinel-2 satellite observations.
The ST products are made available as a set of raster files with 10m and 100m resolution, in ETRS89/LAEA projection corresponding to the High Resolution Layers tiling grid, for those tiles that cover the EEA38 countries and the United Kingdom, and for the period from 2017 until today, with yearly updates.
These Seasonal Trajectories are part of the pan-European High Resolution Vegetation Phenology and Productivity (HR-VPP) component of the Copernicus Land Monitoring Service (CLMS).
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[None
, None
]
]
}
}, |
| keywords: |
['Land'
, 'Plant-phenology-index'
, 'Phenology'
, 'Vegetation'
, 'Sentinel-2'
, 'S2A'
, 'S2B'
, 'S2C'
], |
| license: |
'other', |
| links: |
[{
'href': 'https://land.copernicus.eu/en/technical-library/hr-vpp-data-access-manual/@@download/file'
,
'rel': 'describedby'
,
'type': 'application/pdf'
,
'title': 'User Manual'
}
], |
| constellation: |
'Sentinel-2', |
| instruments: |
[], |
| platform: |
'S2A,S2B,S2C', |
|
|
8
Collection("CLMS_HRVPP_VPP")
| id: |
'CLMS_HRVPP_VPP', |
| title: |
'Vegetation Phenology and Productivity, yearly, UTM projection', |
| description: |
'Vegetation Phenology and Productivity (VPP) comprise 13 parameters up to 2 seasons that characterize the vegetation growth cycle. It is part of the Copernicus Land Monitoring Service (CLMS) HR-VPP product suite.
A set of 13 Vegetation Phenology and Productivity parameters are derived, for up to two growing seasons. These parameters include the start, end and length of the growing season, the dates when the vegetation index reaches its minimum and maximum values, the maximum value itself and its distance to the minimum (amplitude), the slopes of the green-up and green-down periods and the seasonal and total productivity.
The Vegetation and Productivity parameters are extracted from the filtered PPI time-series, the HR-VPP Seasonal Trajectories, and hence based on Copernicus Sentinel-2 satellite observations.
The VPP parameters are made available as a set of raster files with 10m and 100m resolution, in ETRS89/LAEA projection corresponding to the High Resolution Layers tiling grid, for those tiles that cover the EEA38 countries and the United Kingdom and for the period from 2017 until today, with yearly updates.
This VPP product is part of the pan-European High Resolution Vegetation Phenology and Productivity (HR-VPP) component of the Copernicus Land Monitoring Service (CLMS).
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[None
, None
]
]
}
}, |
| keywords: |
['Land'
, 'Plant-phenology-index'
, 'Phenology'
, 'Vegetation'
, 'Sentinel-2'
, 'S2A'
, 'S2B'
, 'S2C'
], |
| license: |
'other', |
| links: |
[{
'href': 'https://land.copernicus.eu/en/technical-library/hr-vpp-data-access-manual/@@download/file'
,
'rel': 'describedby'
,
'type': 'application/pdf'
,
'title': 'User Manual'
}
], |
| constellation: |
'Sentinel-2', |
| instruments: |
[], |
| platform: |
'S2A,S2B,S2C', |
|
|
9
Collection("CLMS_HRVPP_VPP_LAEA")
| id: |
'CLMS_HRVPP_VPP_LAEA', |
| title: |
'Vegetation Phenology and Productivity, yearly, LAEA projection', |
| description: |
'Vegetation Phenology and Productivity (VPP) comprise 13 parameters up to 2 seasons that characterize the vegetation growth cycle. It is part of the Copernicus Land Monitoring Service (CLMS) HR-VPP product suite.
A set of 13 Vegetation Phenology and Productivity parameters are derived, for up to two growing seasons. These parameters include the start, end and length of the growing season, the dates when the vegetation index reaches its minimum and maximum values, the maximum value itself and its distance to the minimum (amplitude), the slopes of the green-up and green-down periods and the seasonal and total productivity.
The Vegetation and Productivity parameters are extracted from the filtered PPI time-series, the HR-VPP Seasonal Trajectories, and hence based on Copernicus Sentinel-2 satellite observations.
The VPP parameters are made available as a set of raster files with 10m and 100m resolution, in ETRS89/LAEA projection corresponding to the High Resolution Layers tiling grid, for those tiles that cover the EEA38 countries and the United Kingdom and for the period from 2017 until today, with yearly updates.
This VPP product is part of the pan-European High Resolution Vegetation Phenology and Productivity (HR-VPP) component of the Copernicus Land Monitoring Service (CLMS).
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[None
, None
]
]
}
}, |
| keywords: |
['Land'
, 'Plant-phenology-index'
, 'Phenology'
, 'Vegetation'
, 'Sentinel-2'
, 'S2A'
, 'S2B'
, 'S2C'
], |
| license: |
'other', |
| links: |
[{
'href': 'https://land.copernicus.eu/en/technical-library/hr-vpp-data-access-manual/@@download/file'
,
'rel': 'describedby'
,
'type': 'application/pdf'
,
'title': 'User Manual'
}
], |
| constellation: |
'Sentinel-2', |
| instruments: |
[], |
| platform: |
'S2A,S2B,S2C', |
|
|
10
Collection("EEA_HRL_TCF")
| id: |
'EEA_HRL_TCF', |
| title: |
'Tree Cover Fraction, UTM projection', |
| description: |
'Tree Cover Fraction (TCF) is defined as the percentage of ground covered by tree canopy when viewed from above.
It is a biophysical variable that characterizes the land surface and is important for many applications in
environmental and climate studies. TCF is derived from Sentinel-2 imagery at 20m resolution using a machine
learning approach. The TCF product is part of the pan-European High Resolution Vegetation Phenology and Productivity
(HR-VPP) component of the Copernicus Land Monitoring Service (CLMS).
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-01-01 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['Land'
, 'Tree-cover-fraction'
, 'TCF'
, 'Sentinel-2'
, 'S2A'
, 'S2B'
, 'S2C'
], |
| license: |
'other', |
| constellation: |
'Sentinel-2', |
| instruments: |
[], |
| platform: |
'S2A,S2B,S2C', |
| eodag:sensor_type: |
'RADAR', |
|
|
11
Collection("MO_GLOBAL_MULTIYEAR_WAV_001_032")
| id: |
'MO_GLOBAL_MULTIYEAR_WAV_001_032', |
| title: |
'Global Ocean Waves Reanalysis', |
| description: |
'GLOBAL_REANALYSIS_WAV_001_032 for the global wave reanalysis describing past sea states since years 1993. This product
also bears the name of WAVERYS within the GLO-HR MFC. for correspondence to other global multi-year products like GLORYS.
BIORYS. etc. The core of WAVERYS is based on the MFWAM model. a third generation wave model that calculates the wave
spectrum. i.e. the distribution of sea state energy in frequency and direction on a 1/5° irregular grid. Average wave
quantities derived from this wave spectrum, such as the SWH (significant wave height) or the average wave period, are
delivered on a regular 1/5° grid with a 3h time step. The wave spectrum is discretized into 30 frequencies obtained from
a geometric sequence of first member 0.035 Hz and a reason 7.5. WAVERYS takes into account oceanic currents from the
GLORYS12 physical ocean reanalysis and assimilates significant wave height observed from historical altimetry missions
and directional wave spectra from Sentinel 1 SAR from 2017 onwards. DOI (product): https://doi.org/10.48670/moi-00022
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[1993-01-01 00:00:00+00:00
, 2024-01-31 21:00:00+00:00
]
]
}
}, |
| keywords: |
['CMEMS'
, 'Mercator'
, 'ocean'
, 'reanalysis'
, 'forecast'
, 'marine'
, 'waves'
, 'WAVERYS'
], |
| license: |
'other', |
| instruments: |
[], |
| processing:level: |
'L4', |
|
|
12
Collection("MO_SEAICE_GLO_SEAICE_L4_NRT_OBSERVATIONS_011_006")
| id: |
'MO_SEAICE_GLO_SEAICE_L4_NRT_OBSERVATIONS_011_006', |
| title: |
'Global Ocean - High Resolution SAR Sea Ice Drift', |
| description: |
'DTU Space produces polar covering Near Real Time gridded ice displacement fields obtained by MCC processing of Sentinel-1 SAR,
Envisat ASAR WSM swath data or RADARSAT ScanSAR Wide mode data . The nominal temporal span between processed swaths is 24hours,
the nominal product grid resolution is a 10km.\n\nDOI (product): \nhttps://doi.org/10.48670/moi-00135
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2019-05-04 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['CMEMS'
, 'Mercator'
, 'ocean'
, 'global'
, 'NRT'
, 'gridded'
, 'MCC'
, 'DTU'
, 'displacement'
, 'L4'
], |
| license: |
'other', |
| instruments: |
[], |
| processing:level: |
'L4', |
|
|
13
Collection("MO_WAVE_GLO_PHY_SPC_FWK_L3_NRT_014_002")
| id: |
'MO_WAVE_GLO_PHY_SPC_FWK_L3_NRT_014_002', |
| title: |
'Global Ocean L 3 Spectral Parameters From Nrt Satellite Measurements', |
| description: |
'Near-Real-Time mono-mission satellite-based integral parameters derived from the directional wave spectra. Using linear
propagation wave model, only wave observations that can be back-propagated to wave converging regions are considered.
The dataset parameters includes partition significant wave height, partition peak period and partition peak or principal
direction given along swell propagation path in space and time at a 3-hour timestep, from source to land. Validity flags
are also included for each parameter and indicates the valid time steps along propagation (eg. no propagation for significant
wave height close to the storm source or any integral parameter when reaching the land). The integral parameters at observation
point are also available together with a quality flag based on the consistency between each propagated observation and the overall
swell field.This product is processed by the WAVE-TAC multi-mission SAR data processing system. It serves in near-real time
the main operational oceanography and climate forecasting centers in Europe and worldwide. It processes near-real-time data
from the following SAR missions: Sentinel-1A and Sentinel-1B.One file is produced for each mission and is available in two
formats: one gathering in one netcdf file all observations related to the same swell field, and for another all observations
available in a 3-hour time range, and for both formats, propagated information from source to land.
\n\nDOI (product): \nhttps://doi.org/10.48670/moi-00178
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2018-04-22 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['CMEMS'
, 'Mercator'
, 'ocean'
, 'global'
, 'NRT'
, 'wave'
, 'L3'
, 'WAVE-TAC'
, 'SAR'
, 'spectral'
, 'mono-mission'
], |
| license: |
'other', |
| instruments: |
[], |
| processing:level: |
'Level 3', |
|
|
14
Collection("MO_WAVE_GLO_PHY_SWH_L3_NRT_014_001")
| id: |
'MO_WAVE_GLO_PHY_SWH_L3_NRT_014_001', |
| title: |
'GLOBAL OCEAN L3 SIGNIFICANT WAVE HEIGHT FROM NRT SATELLITE MEASUREMENTS', |
| description: |
'Near-Real-Time mono-mission satellite-based along-track significant wave height. Only valid data are included, based on a
rigorous editing combining various criteria such as quality flags (surface flag, presence of ice) and thresholds on parameter
values. Such thresholds are applied on parameters linked to significant wave height determination from retracking (e.g. SWH,
sigma0, range, off nadir angle…). All the missions are homogenized with respect to a reference mission (Jason-3 until April 2022,
Sentinel-6A afterwards) and calibrated on in-situ buoy measurements. Finally, an along-track filter is applied to reduce the
measurement noise.\n\nAs a support of information to the significant wave height, wind speed measured by the altimeters is also
processed and included in the files. Wind speed values are provided by upstream products (L2) for each mission and are based on
different algorithms. Only valid data are included and all the missions are homogenized with respect to the reference mission.
\n\nThis product is processed by the WAVE-TAC multi-mission altimeter data processing system. It serves in near-real time the
main operational oceanography and climate forecasting centers in Europe and worldwide. It processes operational data (OGDR and NRT,
produced in near-real-time) from the following altimeter missions: Sentinel-6A, Jason-3, Sentinel-3A, Sentinel-3B, Cryosat-2,
SARAL/AltiKa, CFOSAT ; and interim data (IGDR, 1 to 2 days delay) from Hai Yang-2B mission.\n\nOne file containing valid SWH
is produced for each mission and for a 3-hour time window. It contains the filtered SWH (VAVH), the unfiltered SWH (VAVH_UNFILTERED)
and the wind speed (wind_speed).\n\nDOI (product): \nhttps://doi.org/10.48670/moi-00179
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2021-01-01 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['CMEMS'
, 'Mercator'
, 'ocean'
, 'global'
, 'NRT'
, 'wave'
, 'height'
, 'L3'
, 'wind'
, 'speed'
, 'WAVE-TAC'
, 'mono-mission'
], |
| license: |
'other', |
| instruments: |
[], |
| processing:level: |
'Level 3', |
|
|
15
Collection("MO_WAVE_GLO_PHY_SWH_L4_NRT_014_003")
| id: |
'MO_WAVE_GLO_PHY_SWH_L4_NRT_014_003', |
| title: |
'GLOBAL OCEAN L4 SIGNIFICANT WAVE HEIGHT FROM NRT SATELLITE MEASUREMENTS', |
| description: |
'Near-Real-Time gridded multi-mission merged satellite significant wave height. Only valid data are included. This product
is processed in Near-Real-Time by the WAVE-TAC multi-mission altimeter data processing system and is based on CMEMS level-3
SWH datasets (see the product WAVE_GLO_WAV_L3_SWH_NRT_OBSERVATIONS_014_001).\nIt merges along-track SWH data from the following
missions: Jason-3, Sentinel-3A, Sentinel-3B, SARAL/AltiKa, Cryosat-2, CFOSAT and HaiYang-2B. The resulting gridded product has
a 2° horizontal resolution and is produced daily. Different SWH fields are produced: VAVH_DAILY fields are daily statistics
computed from all available level 3 along-track measurements from 00 UTC until 23:59 UTC ; VAVH_INST field provides an estimate
of the instantaneous wave field at 12:00UTC (noon), using all available Level 3 along-track measurements and accounting for
their spatial and temporal proximity.\n\nDOI (product): \nhttps://doi.org/10.48670/moi-00180
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2020-01-01 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['CMEMS'
, 'Mercator'
, 'ocean'
, 'global'
, 'NRT'
, 'wave'
, 'height'
, 'L4'
, 'gridded'
, 'WAVE-TAC'
, 'multi-mission'
], |
| license: |
'other', |
| instruments: |
[], |
| processing:level: |
'L4', |
|
|
16
Collection("S1_AUX_GNSSRD")
| id: |
'S1_AUX_GNSSRD', |
| title: |
'SENTINEL1 Auxiliary Product', |
| description: |
'The Auxiliary (AUX) product contains the precise orbit ephemerides and the GNSS-Raw Data (GNSSRD) data.
The precise orbit ephemerides are provided as a text file in the format of the International GNSS Service (IGS).
The GNSS-Raw Data (GNSSRD) data is provided as a binary file in a specific format.
SAFE formatted product, see
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-1-sar/data-formats/safe-specification
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-04-06 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SAR'
, 'SENTINEL'
, 'SENTINEL1'
, 'S1'
, 'S1A'
, 'S1B'
, 'S1C'
, 'AUX'
, 'GNSSRD'
, 'SAFE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL1', |
| instruments: |
['SAR'
], |
| platform: |
'S1A,S1B,S1C', |
| processing:level: |
'AUX', |
| eodag:sensor_type: |
'RADAR', |
|
|
17
Collection("S1_AUX_MOEORB")
| id: |
'S1_AUX_MOEORB', |
| title: |
'SENTINEL1 Auxiliary Product', |
| description: |
'The Auxiliary (AUX) product contains the precise orbit ephemerides and the GNSS-Raw Data (GNSSRD) data.
The precise orbit ephemerides are provided as a text file in the format of the European Space Operations Centre
(ESOC).
The GNSS-Raw Data (GNSSRD) data is provided as a binary file in a specific format.
SAFE formatted product, see
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-1-sar/data-formats/safe-specification
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-04-06 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SAR'
, 'SENTINEL'
, 'SENTINEL1'
, 'S1'
, 'S1A'
, 'S1B'
, 'S1C'
, 'AUX'
, 'MOEORB'
, 'SAFE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL1', |
| instruments: |
['SAR'
], |
| platform: |
'S1A,S1B,S1C', |
| processing:level: |
'AUX', |
| eodag:sensor_type: |
'RADAR', |
|
|
18
Collection("S1_AUX_POEORB")
| id: |
'S1_AUX_POEORB', |
| title: |
'SENTINEL1 Auxiliary Product', |
| description: |
'The Auxiliary (AUX) product contains the precise orbit ephemerides and the GNSS-Raw Data (GNSSRD) data.
The precise orbit ephemerides are provided as a text file in the format of the European Space Operations Centre
(ESOC).
The GNSS-Raw Data (GNSSRD) data is provided as a binary file in a specific format.
SAFE formatted product, see
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-1-sar/data-formats/safe-specification
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-04-06 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SAR'
, 'SENTINEL'
, 'SENTINEL1'
, 'S1'
, 'S1A'
, 'S1B'
, 'S1C'
, 'AUX'
, 'POEORB'
, 'SAFE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL1', |
| instruments: |
['SAR'
], |
| platform: |
'S1A,S1B,S1C', |
| processing:level: |
'AUX', |
| eodag:sensor_type: |
'RADAR', |
|
|
19
Collection("S1_AUX_PREORB")
| id: |
'S1_AUX_PREORB', |
| title: |
'SENTINEL1 Auxiliary Product', |
| description: |
'The Auxiliary (AUX) product contains the precise orbit ephemerides and the GNSS-Raw Data (GNSSRD) data.
The precise orbit ephemerides are provided as a text file in the format of the European Space Operations Centre
(ESOC).
The GNSS-Raw Data (GNSSRD) data is provided as a binary file in a specific format.
SAFE formatted product, see
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-1-sar/data-formats/safe-specification
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-04-06 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SAR'
, 'SENTINEL'
, 'SENTINEL1'
, 'S1'
, 'S1A'
, 'S1B'
, 'S1C'
, 'AUX'
, 'PREORB'
, 'SAFE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL1', |
| instruments: |
['SAR'
], |
| platform: |
'S1A,S1B,S1C', |
| processing:level: |
'AUX', |
| eodag:sensor_type: |
'RADAR', |
|
|
20
Collection("S1_AUX_PROQUA")
| id: |
'S1_AUX_PROQUA', |
| title: |
'SENTINEL1 Auxiliary Product', |
| description: |
'The Auxiliary (AUX) product contains the precise orbit ephemerides and the GNSS-Raw Data (GNSSRD) data.
The precise orbit ephemerides are provided as a text file in the format of the European Space Operations Centre
(ESOC).
The GNSS-Raw Data (GNSSRD) data is provided as a binary file in a specific format.
SAFE formatted product, see
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-1-sar/data-formats/safe-specification
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-04-06 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SAR'
, 'SENTINEL'
, 'SENTINEL1'
, 'S1'
, 'S1A'
, 'S1B'
, 'S1C'
, 'AUX'
, 'PROQUA'
, 'SAFE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL1', |
| instruments: |
['SAR'
], |
| platform: |
'S1A,S1B,S1C', |
| processing:level: |
'AUX', |
| eodag:sensor_type: |
'RADAR', |
|
|
21
Collection("S1_AUX_RESORB")
| id: |
'S1_AUX_RESORB', |
| title: |
'SENTINEL1 Auxiliary Product', |
| description: |
'The Auxiliary (AUX) product contains the precise orbit ephemerides and the GNSS-Raw Data (GNSSRD) data.
The precise orbit ephemerides are provided as a text file in the format of the European Space Operations Centre
(ESOC).
The GNSS-Raw Data (GNSSRD) data is provided as a binary file in a specific format.
SAFE formatted product, see
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-1-sar/data-formats/safe-specification
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-04-06 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SAR'
, 'SENTINEL'
, 'SENTINEL1'
, 'S1'
, 'S1A'
, 'S1B'
, 'S1C'
, 'AUX'
, 'RESORB'
, 'SAFE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL1', |
| instruments: |
['SAR'
], |
| platform: |
'S1A,S1B,S1C', |
| processing:level: |
'AUX', |
| eodag:sensor_type: |
'RADAR', |
|
|
22
Collection("S1_SAR_GRD")
| id: |
'S1_SAR_GRD', |
| title: |
'SENTINEL1 Level-1 Ground Range Detected', |
| description: |
'Level-1 Ground Range Detected (GRD) products consist of focused SAR data that has been detected, multi-looked and
projected to ground range using an Earth ellipsoid model. Phase information is lost. The resulting product has
approximately square spatial resolution pixels and square pixel spacing with reduced speckle at the cost of worse
spatial resolution.
GRD products can be in one of three resolutions: |
Full Resolution (FR),
High Resolution (HR),
Medium Resolution (MR).
The resolution is dependent upon the amount of multi-looking performed. Level-1 GRD products are available in MR
and HR for IW and EW modes, MR for WV mode and MR, HR and FR for SM mode.
SAFE formatted product, see
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-1-sar/data-formats/safe-specification
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-04-03 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SAR'
, 'SENTINEL'
, 'SENTINEL1'
, 'S1'
, 'S1A'
, 'S1B'
, 'S1C'
, 'L1'
, 'GRD'
, 'SAFE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL1', |
| instruments: |
['SAR'
], |
| platform: |
'S1A,S1B,S1C', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'RADAR', |
|
|
23
Collection("S1_SAR_GRD_COG")
| id: |
'S1_SAR_GRD_COG', |
| title: |
'SENTINEL1 Level-1 Ground Range Detected', |
| description: |
'Level-1 Ground Range Detected (GRD) products consist of focused SAR data that has been detected, multi-looked and
projected to ground range using an Earth ellipsoid model. Phase information is lost. The resulting product has
approximately square spatial resolution pixels and square pixel spacing with reduced speckle at the cost of worse
spatial resolution.
GRD products can be in one of three resolutions: |
Full Resolution (FR),
High Resolution (HR),
Medium Resolution (MR).
The resolution is dependent upon the amount of multi-looking performed. Level-1 GRD products are available in MR
and HR for IW and EW modes, MR for WV mode and MR, HR and FR for SM mode.
Product containing Cloud Optimized GeoTIFF images, without SAFE formatting.
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-1-sar/data-formats/safe-specification
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-04-03 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SAR'
, 'SENTINEL'
, 'SENTINEL1'
, 'S1'
, 'S1A'
, 'S1B'
, 'S1C'
, 'L1'
, 'GRD'
, 'COG'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL1', |
| instruments: |
['SAR'
], |
| platform: |
'S1A,S1B,S1C', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'RADAR', |
|
|
24
Collection("S1_SAR_L3_DH_MCM")
| id: |
'S1_SAR_L3_DH_MCM', |
| title: |
'SENTINEL1 Level-3 DH MCM', |
| description: |
'Level-3 DH (Dual polarization High Resolution) products are terrain corrected (geocoded) products in map geometry,
projected using the Range-Doppler model and resampled using nearest neighbor method. The pixel spacing is
approximately 10 m x 10 m. The product is available in dual polarization (HH+HV or VV+VH). The product is provided
in GeoTIFF format.
Product containing Cloud Optimized GeoTIFF images, without SAFE formatting.
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-1-sar/data-formats/safe-specification
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2023-01-01 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SAR'
, 'SENTINEL'
, 'SENTINEL1'
, 'S1'
, 'S1A'
, 'S1B'
, 'S1C'
, 'L3'
, 'DH'
, 'MCM'
, 'COG'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL1', |
| instruments: |
['SAR'
], |
| platform: |
'S1A,S1B,S1C', |
| processing:level: |
'L3', |
| eodag:sensor_type: |
'RADAR', |
|
|
25
Collection("S1_SAR_L3_IW_MCM")
| id: |
'S1_SAR_L3_IW_MCM', |
| title: |
'SENTINEL1 Level-3 IW MCM', |
| description: |
'Level-3 IW (Interferometric Wide Swath) products are terrain corrected (geocoded) products in map geometry,
projected using the Range-Doppler model and resampled using nearest neighbor method. The pixel spacing is
approximately 10 m x 10 m. The product is available in two polarizations: Single (HH or VV) and Dual (HH+HV or
VV+VH). The product is provided in GeoTIFF format.
Product containing Cloud Optimized GeoTIFF images, without SAFE formatting.
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-1-sar/data-formats/safe-specification
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2023-01-01 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SAR'
, 'SENTINEL'
, 'SENTINEL1'
, 'S1'
, 'S1A'
, 'S1B'
, 'S1C'
, 'L3'
, 'IW'
, 'MCM'
, 'COG'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL1', |
| instruments: |
['SAR'
], |
| platform: |
'S1A,S1B,S1C', |
| processing:level: |
'L3', |
| eodag:sensor_type: |
'RADAR', |
|
|
26
Collection("S1_SAR_OCN")
| id: |
'S1_SAR_OCN', |
| title: |
'SENTINEL1 Level-2 OCN', |
| description: |
'Level-2 OCN products include components for Ocean Swell spectra (OSW) providing continuity with ERS and ASAR WV
and two new components: Ocean Wind Fields (OWI) and Surface Radial Velocities (RVL).
The OSW is a two-dimensional ocean surface swell spectrum and includes an estimate of the wind speed and direction
per swell spectrum. The OSW is generated from Stripmap and Wave modes only. For Stripmap mode, there are multiple
spectra derived from internally generated Level-1 SLC images. For Wave mode, there is one spectrum per vignette.
The OWI is a ground range gridded estimate of the surface wind speed and direction at 10 m above the surface
derived from internally generated Level-1 GRD images of SM, IW or EW modes.
The RVL is a ground range gridded difference between the measured Level-2 Doppler grid and the Level-1 calculated
geometrical Doppler.
SAFE formatted product, see
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-1-sar/data-formats/safe-specification
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-04-03 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SAR'
, 'SENTINEL'
, 'SENTINEL1'
, 'S1'
, 'S1A'
, 'S1B'
, 'S1C'
, 'L2'
, 'OCN'
, 'SAFE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL1', |
| instruments: |
['SAR'
], |
| platform: |
'S1A,S1B,S1C', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'RADAR', |
|
|
27
Collection("S1_SAR_RAW")
| id: |
'S1_SAR_RAW', |
| title: |
'SENTINEL1 SAR Level-0', |
| description: |
'The SAR Level-0 products consist of the sequence of Flexible Dynamic Block Adaptive Quantization (FDBAQ) compressed
unfocused SAR raw data. For the data to be usable, it will need to be decompressed and processed using a SAR
processor.
SAFE formatted product, see
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-1-sar/data-formats/safe-specification
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-04-03 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SAR'
, 'SENTINEL'
, 'SENTINEL1'
, 'S1'
, 'S1A'
, 'S1B'
, 'S1C'
, 'L0'
, 'RAW'
, 'SAFE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL1', |
| instruments: |
['SAR'
], |
| platform: |
'S1A,S1B,S1C', |
| processing:level: |
'L0', |
| eodag:sensor_type: |
'RADAR', |
|
|
28
Collection("S1_SAR_SLC")
| id: |
'S1_SAR_SLC', |
| title: |
'SENTINEL1 Level-1 Single Look Complex', |
| description: |
'Level-1 Single Look Complex (SLC) products consist of focused SAR data geo-referenced using orbit and attitude
data from the satellite and provided in zero-Doppler slant-range geometry. The products include a single look in
each dimension using the full transmit signal bandwidth and consist of complex samples preserving the phase
information.
SAFE formatted product, see
https://sentinel.esa.int/web/sentinel/user-guides/sentinel-1-sar/data-formats/safe-specification
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2014-04-03 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SAR'
, 'SENTINEL'
, 'SENTINEL1'
, 'S1'
, 'S1A'
, 'S1B'
, 'S1C'
, 'L1'
, 'SLC'
, 'SAFE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL1', |
| instruments: |
['SAR'
], |
| platform: |
'S1A,S1B,S1C', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'RADAR', |
|
|
29
Collection("S2_MSI_L1C")
| id: |
'S2_MSI_L1C', |
| title: |
'SENTINEL2 Level-1C', |
| description: |
'The Level-1C product is composed of 100x100 km2 tiles (ortho-images in UTM/WGS84 projection). It results from
using a Digital Elevation Model (DEM) to project the image in cartographic geometry. Per-pixel radiometric
measurements are provided in Top Of Atmosphere (TOA) reflectances along with the parameters to transform them
into radiances. Level-1C products are resampled with a constant Ground Sampling Distance (GSD) of 10, 20 and 60
meters depending on the native resolution of the different spectral bands. In Level-1C products, pixel
coordinates refer to the upper left corner of the pixel. Level-1C products will additionally include Cloud Masks
and ECMWF data (total column of ozone, total column of water vapour and mean sea level pressure).
SAFE formatted product, see https://sentinel.esa.int/web/sentinel/user-guides/sentinel-2-msi/data-formats
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2015-06-23 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['MSI'
, 'SENTINEL'
, 'SENTINEL2'
, 'S2'
, 'S2A'
, 'S2B'
, 'S2C'
, 'L1'
, 'L1C'
, 'SAFE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL2', |
| instruments: |
['MSI'
], |
| platform: |
'S2A,S2B,S2C', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
30
Collection("S2_MSI_L2A")
| id: |
'S2_MSI_L2A', |
| title: |
'SENTINEL2 Level-2A', |
| description: |
'The Level-2A product provides Bottom Of Atmosphere (BOA) reflectance images derived from the associated Level-1C
products. Each Level-2A product is composed of 100x100 km2 tiles in cartographic geometry (UTM/WGS84 projection).
SAFE formatted product, see https://sentinel.esa.int/web/sentinel/user-guides/sentinel-2-msi/data-formats
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2018-03-26 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['MSI'
, 'SENTINEL'
, 'SENTINEL2'
, 'S2'
, 'S2A'
, 'S2B'
, 'S2C'
, 'L2'
, 'L2A'
, 'SAFE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL2', |
| instruments: |
['MSI'
], |
| platform: |
'S2A,S2B,S2C', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
31
Collection("S2_MSI_L2A_COG")
| id: |
'S2_MSI_L2A_COG', |
| title: |
'SENTINEL2 Level-2A', |
| description: |
'The Level-2A product provides Bottom Of Atmosphere (BOA) reflectance images derived from the associated Level-1C
products. Each Level-2A product is composed of 100x100 km2 tiles in cartographic geometry (UTM/WGS84 projection).
Product containing Cloud Optimized GeoTIFF images, without SAFE formatting.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2015-06-23 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['MSI'
, 'SENTINEL'
, 'SENTINEL2'
, 'S2'
, 'S2A'
, 'S2B'
, 'S2C'
, 'L2'
, 'L2A'
, 'COG'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL2', |
| instruments: |
['MSI'
], |
| platform: |
'S2A,S2B,S2C', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
32
Collection("S2_MSI_L2A_MAJA")
| id: |
'S2_MSI_L2A_MAJA', |
| title: |
'SENTINEL2 Level-2A', |
| description: |
'The level 2A products correct the data for atmospheric effects and detect the clouds and their shadows using MAJA.
MAJA uses MUSCATE processing center at CNES, in the framework of THEIA land data center. Sentinel-2 level 1C data
are downloaded from PEPS. The full description of the product format is available at
https://theia.cnes.fr/atdistrib/documents/PSC-NT-411-0362-CNES_01_00_SENTINEL-2A_L2A_Products_Description.pdf
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2015-06-23 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['MSI'
, 'SENTINEL'
, 'SENTINEL2'
, 'S2'
, 'S2A'
, 'S2B'
, 'S2C'
, 'L2'
, 'L2A'
, 'MAJA'
], |
| license: |
'other', |
| providers: |
[{
'name': 'Centre National d'Etudes Spatiales (CNES)'
,
'roles': ['processor'
]
,
'url': 'https://www.cnes.fr'
}
], |
| constellation: |
'SENTINEL2', |
| instruments: |
['MSI'
], |
| platform: |
'S2A,S2B,S2C', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
33
Collection("S2_MSI_L2B_MAJA_SNOW")
| id: |
'S2_MSI_L2B_MAJA_SNOW', |
| title: |
'SENTINEL2 snow product', |
| description: |
'The Theia snow product is derived from Sentinel-2 L2A images generated by Theia. It indicates the snow presence or
absence on the land surface every fifth day if there is no cloud. The product is distributed by Theia as a raster
file (8 bits GeoTIFF) of 20 m resolution and a vector file (Shapefile polygons). More details about the snow
products description are available at http://www.cesbio.ups-tlse.fr/multitemp/?page_id=10748#en
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2015-06-23 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['MSI'
, 'MAJA'
, 'SENTINEL'
, 'sentinel2'
, 'S2'
, 'S2A'
, 'S2B'
, 'S2C'
, 'L2'
, 'L2B'
, 'SNOW'
], |
| license: |
'other', |
| providers: |
[{
'name': 'Centre National d'Etudes Spatiales (CNES)'
,
'roles': ['processor'
]
,
'url': 'https://www.cnes.fr'
}
], |
| constellation: |
'SENTINEL2', |
| instruments: |
['MSI'
], |
| platform: |
'S2A,S2B,S2C', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
34
Collection("S2_MSI_L2B_MAJA_WATER")
| id: |
'S2_MSI_L2B_MAJA_WATER', |
| title: |
'SENTINEL2 L2B-WATER', |
| description: |
'A description of the Land Water Quality data distributed by Theia is available at
https://theia.cnes.fr/atdistrib/documents/THEIA-ST-411-0477-CNES_01-03_Format_Specification_of_OBS2CO_WaterColor_Products.pdf
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2015-06-23 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['MSI'
, 'MAJA'
, 'SENTINEL'
, 'sentinel2'
, 'S2'
, 'S2A'
, 'S2B'
, 'S2C'
, 'L2'
, 'L2B'
, 'WATER'
], |
| license: |
'other', |
| providers: |
[{
'name': 'Centre National d'Etudes Spatiales (CNES)'
,
'roles': ['processor'
]
,
'url': 'https://www.cnes.fr'
}
], |
| constellation: |
'SENTINEL2', |
| instruments: |
['MSI'
], |
| platform: |
'S2A,S2B,S2C', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
35
Collection("S3_EFR")
| id: |
'S3_EFR', |
| title: |
'SENTINEL3 EFR', |
| description: |
'OLCI (Ocean and Land Colour Instrument) Full resolution: 300m at nadir. Level 1 products are calibrated
Top Of Atmosphere radiance values at OLCI 21 spectral bands. Radiances are computed from the instrument digital
counts by applying geo-referencing, radiometric processing (non-linearity correction, smear correction, dark offset
correction, absolute gain calibration adjusted for gain evolution with time), and stray-light correction for
straylight effects in OLCI camera's spectrometer and ground imager. Additionally, spatial resampling of OLCI pixels
to the 'ideal' instrument grid, initial pixel classification, and annotation at tie points with auxiliary
meteorological data and acquisition geometry are provided. The radiance products are accompanied by error estimate
products, however the error values are currently not available. - All Sentinel-3 NRT products are available at
pick-up point in less than 3h. - All Sentinel-3 Non Time Critical (NTC) products are available at pick-up point in
less than 30 days. Sentinel-3 is part of a series of Sentinel satellites, under the umbrella of the
EU Copernicus programme.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['OLCI'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'EFR'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['OLCI'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
36
Collection("S3_EFR_BC002")
| id: |
'S3_EFR_BC002', |
| title: |
'OLCI Level 1B Full Resolution (version BC002) - Sentinel-3 - Reprocessed', |
| description: |
'OLCI (Ocean and Land Colour Instrument) Full resolution: 300m at nadir. Level 1 products are calibrated
Top Of Atmosphere radiance values at OLCI 21 spectral bands. Radiances are computed from the instrument digital
counts by applying geo-referencing, radiometric processing (non-linearity correction, smear correction, dark offset
correction, absolute gain calibration adjusted for gain evolution with time), and stray-light correction for
straylight effects in OLCI camera's spectrometer and ground imager. Additionally, spatial resampling of OLCI pixels
to the 'ideal' instrument grid, initial pixel classification, and annotation at tie points with auxiliary
meteorological data and acquisition geometry are provided. The radiance products are accompanied by error estimate
products, however the error values are currently not available. - All Sentinel-3 NRT products are available at
pick-up point in less than 3h. - All Sentinel-3 Non Time Critical (NTC) products are available at pick-up point in
less than 30 days. Sentinel-3 is part of a series of Sentinel satellites, under the umbrella of the
EU Copernicus programme.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-04-25 00:00:00+00:00
, 2019-10-29 00:00:00+00:00
]
]
}
}, |
| keywords: |
['OLCI'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'EFR'
, 'BC002'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['OLCI'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
37
Collection("S3_ERR")
| id: |
'S3_ERR', |
| title: |
'SENTINEL3 ERR', |
| description: |
'OLCI (Ocean and Land Colour Instrument) Reduced resolution: 1200m at nadir. All Sentinel-3 NRT products are
available at pick-up point in less than 3h. Level 1 products are calibrated Top Of Atmosphere radiance values
at OLCI 21 spectral bands. Radiances are computed from the instrument digital counts by applying geo-referencing,
radiometric processing (non-linearity correction, smear correction, dark offset correction, absolute gain
calibration adjusted for gain evolution with time), and stray-light correction for straylight effects in OLCI
camera's spectrometer and ground imager. Additionally, spatial resampling of OLCI pixels to the 'ideal' instrument
grid, initial pixel classification, and annotation at tie points with auxiliary meteorological data and acquisition
geometry are provided. The radiance products are accompanied by error estimate products, however the error values
are currently not available. - All Sentinel-3 NRT products are available at pick-up point in less than 3h
- All Sentinel-3 Non Time Critical (NTC) products are available at pick-up point in less than 30 days Sentinel-3 is
part of a series of Sentinel satellites, under the umbrella of the EU Copernicus programme.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['OLCI'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'ERR'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['OLCI'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
38
Collection("S3_ERR_BC002")
| id: |
'S3_ERR_BC002', |
| title: |
'OLCI Level 1B Reduced Resolution (version BC002) - Sentinel-3 - Reprocessed', |
| description: |
'OLCI (Ocean and Land Colour Instrument) Reduced resolution: 1200m at nadir. Level 1 products are calibrated
Top Of Atmosphere radiance values at OLCI 21 spectral bands. Radiances are computed from the instrument digital
counts by applying geo-referencing, radiometric processing (non-linearity correction, smear correction, dark
offset correction, absolute gain calibration adjusted for gain evolution with time), and stray-light correction
for straylight effects in OLCI camera's spectrometer and ground imager. Additionally, spatial resampling of
OLCI pixels to the 'ideal' instrument grid, initial pixel classification, and annotation at tie points with
auxiliary meteorological data and acquisition geometry are provided. The radiance products are accompanied
by error estimate products, however the error values are currently not available. Sentinel-3 is part of a
series of Sentinel satellites, under the umbrella of the EU Copernicus programme. This collection contains
reprocessed data from baseline collection 002. Operational data can be found in the corresponding collection.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-04-25 00:00:00+00:00
, 2019-10-29 00:00:00+00:00
]
]
}
}, |
| keywords: |
['OLCI'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'ERR'
, 'BC002'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['OLCI'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
39
Collection("S3_LAN")
| id: |
'S3_LAN', |
| title: |
'SENTINEL3 SRAL Level-2 LAN', |
| description: |
'LAN or SR_2_LAN___', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'LAN'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'RADAR', |
|
|
40
Collection("S3_LAN_HY")
| id: |
'S3_LAN_HY', |
| title: |
'SENTINEL3 SRAL Level-2 LAN HYDRO', |
| description: |
'Sentinel-3 STM payload includes two main instruments: the Sentinel-3 Radar ALtimeter (SRAL) and a MicroWave
Radiometer (MWR). SRAL is providing continuous topography measurements of the Earth's surface. It is the first
radar altimeter operating exclusively with delay-Doppler capabilities, which provides a significant improvement of
the along-track resolution compared to conventional Low Resolution Mode (LRM) altimeters. This enhancement is
highly valuable over continental and sea ice surfaces, considering their heterogeneous characteristics.
ESA and the Sentinel-3 Mission Performance Cluster (MPC) have developed in 2021-2022 dedicated delay-Doppler and
Level-2 processing chains for the generation of new Sentinel-3 STM LAND level-2 products over inland waters,
sea-ice, and land ice areas. The main objective of these so-called “Thematic Products” is to address the specific
needs of the user communities related to the three different Thematic surfaces.
For Hydrology Thematic Products, the coverage includes all the continental surfaces, except the Antarctica ice
sheet, and Greenland ice sheet interior. Over coastal zones the 50 km common area between Land and Marine products
remains. Therefore, the Hydrology products cover up to 25 km over surfaces considered as Marine.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'LAN'
, 'HYDROLOGY'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'RADAR', |
|
|
41
Collection("S3_LAN_LI")
| id: |
'S3_LAN_LI', |
| title: |
'SENTINEL3 SRAL Level-2 LAN LAND ICE', |
| description: |
'Sentinel-3 STM payload includes two main instruments: the Sentinel-3 Radar ALtimeter (SRAL) and a MicroWave
Radiometer (MWR). SRAL is providing continuous topography measurements of the Earth's surface. It is the first
radar altimeter operating exclusively with delay-Doppler capabilities, which provides a significant improvement of
the along-track resolution compared to conventional Low Resolution Mode (LRM) altimeters. This enhancement is
highly valuable over continental and sea ice surfaces, considering their heterogeneous characteristics.
ESA and the Sentinel-3 Mission Performance Cluster (MPC) have developed in 2021-2022 dedicated delay-Doppler and
Level-2 processing chains for the generation of new Sentinel-3 STM LAND level-2 products over inland waters,
sea-ice, and land ice areas. The main objective of these so-called “Thematic Products” is to address the specific
needs of the user communities related to the three different Thematic surfaces.
Each Sentinel-3 STM Land Thematic Product has a dedicated geographical coverage, defined in a Thematic Mask. For
Land Ice Thematic Products, the mask includes the Antarctica and Greenland ice sheets, along with glacier areas as
defined in the Randolph Glacier Inventory (RGI) database.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'LAN'
, 'LAND'
, 'ICE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'RADAR', |
|
|
42
Collection("S3_LAN_SI")
| id: |
'S3_LAN_SI', |
| title: |
'SENTINEL3 SRAL Level-2 LAN SEA ICE', |
| description: |
'Sentinel-3 STM payload includes two main instruments: the Sentinel-3 Radar ALtimeter (SRAL) and a MicroWave
Radiometer (MWR). SRAL is providing continuous topography measurements of the Earth's surface. It is the first
radar altimeter operating exclusively with delay-Doppler capabilities, which provides a significant improvement of
the along-track resolution compared to conventional Low Resolution Mode (LRM) altimeters. This enhancement is
highly valuable over continental and sea ice surfaces, considering their heterogeneous characteristics.
ESA and the Sentinel-3 Mission Performance Cluster (MPC) have developed in 2021-2022 dedicated delay-Doppler and
Level-2 processing chains for the generation of new Sentinel-3 STM LAND level-2 products over inland waters,
sea-ice, and land ice areas. The main objective of these so-called “Thematic Products” is to address the specific
needs of the user communities related to the three different Thematic surfaces.
Each Sentinel-3 STM Land Thematic Product has a dedicated geographical coverage, defined in a Thematic Mask. For Sea
Ice Thematic Products, the mask remains static, and the coverage was calculated by the Expert Support
Laboratories (ESL) of the Sentinel-3 MPC, based on the maximum of sea ice extent given a NSIDC sea ice climatology.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'LAN'
, 'SEA'
, 'ICE'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'RADAR', |
|
|
43
Collection("S3_OLCI_L2LFR")
| id: |
'S3_OLCI_L2LFR', |
| title: |
'SENTINEL3 OLCI Level-2 Land Full Resolution', |
| description: |
'The OLCI Level-2 Land Full Resolution (OL_2_LFR) products contain land and atmospheric geophysical products at Full
resolution with a spatial sampling of approximately 300 m. The products are assumed to be computed in Near Real
Time (NRT) (i.e. delivered to users less than 3 hours after acquisition), in Non-Time Critical (NTC) (i.e.
within 1 month after acquisition) or in re-processed NTC.
Details at https://sentinel.esa.int/web/sentinel/user-guides/sentinel-3-olci/product-types/level-2-land
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['OLCI'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'L2LFR'
, 'LFR'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['OLCI'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
44
Collection("S3_OLCI_L2LRR")
| id: |
'S3_OLCI_L2LRR', |
| title: |
'SENTINEL3 OLCI Level-2 Land Reduced Resolution', |
| description: |
'The OLCI Level-2 Land Reduced Resolution (OL_2_LRR) products contain land and atmospheric geophysical products
at Reduced resolution with a spatial sampling of approximately 1.2 km. The products are assumed to be computed
in Near Real Time (NRT) (i.e. delivered to users less than 3 hours after acquisition), in Non-Time Critical
(NTC) (i.e. within 1 month after acquisition) or in re-processed NTC.
Details at https://sentinel.esa.int/web/sentinel/user-guides/sentinel-3-olci/product-types/level-2-land
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['OLCI'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'L2LRR'
, 'LRR'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['OLCI'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
45
Collection("S3_OLCI_L2WFR")
| id: |
'S3_OLCI_L2WFR', |
| title: |
'SENTINEL3 OLCI Level-2 Water Full Resolution', |
| description: |
'The OLCI Level-2 Water Full Resolution (OL_2_WFR) products contain water and atmospheric geophysical products at Full
resolution with a spatial sampling of approximately 300 m. The products are assumed to be computed in Near Real
Time (NRT) (i.e. delivered to users less than 3 hours after acquisition), in Non-Time Critical (NTC) (i.e.
within 1 month after acquisition) or in re-processed NTC.
Details at https://sentinel.esa.int/web/sentinel/user-guides/sentinel-3-olci/product-types/level-2-water
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['OLCI'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'L2WFR'
, 'WFR'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['OLCI'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
46
Collection("S3_OLCI_L2WFR_BC003")
| id: |
'S3_OLCI_L2WFR_BC003', |
| title: |
'SENTINEL3 OLCI Level-2 Water Full Resolution Reprocessed from BC003', |
| description: |
'OLCI Level 2 Marine products provide spectral information on the colour of the oceans (water reflectances). These
radiometric products are used to estimate geophysical parameters e.g. estimates of phytoplankton biomass through
determining the Chlorophyll-a (Chl) concentration. In coastal areas, they also allow monitoring of the sediment
load via the Total Suspended Matter (TSM) product. Full resolution products are at a nominal 300m resolution. This
collection contains reprocessed data from baseline collection 003. Operational data can be found in the
corresponding collection.
Details at https://sentinel.esa.int/web/sentinel/user-guides/sentinel-3-olci/product-types/level-2-water
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['OLCI'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'L2WFR'
, 'WFR'
, 'REPROCESSED'
, 'BC003'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['OLCI'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
47
Collection("S3_OLCI_L2WRR")
| id: |
'S3_OLCI_L2WRR', |
| title: |
'SENTINEL3 OLCI Level-2 Water Reduced Resolution', |
| description: |
'The OLCI Level-2 Water Reduced Resolution (OL_2_WRR) products contain water and atmospheric geophysical products
at Reduced resolution with a spatial sampling of approximately 1.2 km. The products are assumed to be computed
in Near Real Time (NRT) (i.e. delivered to users less than 3 hours after acquisition), in Non-Time Critical
(NTC) (i.e. within 1 month after acquisition) or in re-processed NTC.
Details at https://sentinel.esa.int/web/sentinel/user-guides/sentinel-3-olci/product-types/level-2-water
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['OLCI'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'L2WRR'
, 'WRR'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['OLCI'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
48
Collection("S3_OLCI_L2WRR_BC003")
| id: |
'S3_OLCI_L2WRR_BC003', |
| title: |
'SENTINEL3 OLCI Level-2 Water Reduced Resolution Reprocessed from BC003', |
| description: |
'OLCI Level 2 Marine products provide spectral information on the colour of the oceans (water reflectances). These
radiometric products are used to estimate geophysical parameters e.g. estimates of phytoplankton biomass through
determining the Chlorophyll-a (Chl) concentration. In coastal areas, they also allow monitoring of the sediment
load via the Total Suspended Matter (TSM) product. Reduced resolution products are at a nominal 1km resolution.
This collection contains reprocessed data from baseline collection 003. Operational data can be found in the
corresponding collection.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['OLCI'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'L2WRR'
, 'WRR'
, 'REPROCESSED'
, 'BC003'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['OLCI'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
49
Collection("S3_OL_2_WFRBC003")
| id: |
'S3_OL_2_WFRBC003', |
| title: |
'OLCI Level 2 Ocean Colour Full Resolution (version BC003) - Sentinel-3 - Reprocessed', |
| description: |
'OLCI Level 2 Marine products provide spectral information on the colour of the oceans (water reflectances).
These radiometric products are used to estimate geophysical parameters e.g. estimates of phytoplankton biomass
through determining the Chlorophyll-a (Chl) concentration. In coastal areas, they also allow monitoring of
the sediment load via the Total Suspended Matter (TSM) product. Full resolution products are at a nominal
300m resolution. This collection contains reprocessed data from baseline collection 003. Operational data
can be found in the corresponding collection.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-04-25 00:00:00+00:00
, 2021-04-28 00:00:00+00:00
]
]
}
}, |
| keywords: |
['OLCI'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'Radiation'
, 'Ocean'
, 'Ocean Colour'
], |
| license: |
'proprietary', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['OLCI'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
50
Collection("S3_RAC")
| id: |
'S3_RAC', |
| title: |
'SENTINEL3 RAC', |
| description: |
'Sentinel 3 OLCI products output during Radiometric Calibration mode
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['OLCI'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'L2'
, 'RAC'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['OLCI'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'OPTICAL', |
|
|
51
Collection("S3_SLSTR_L1RBT")
| id: |
'S3_SLSTR_L1RBT', |
| title: |
'SENTINEL3 SLSTR Level-1', |
| description: |
'SLSTR Level-1 observation mode products consisting of full resolution,
geolocated, co-located nadir and along track view, Top of Atmosphere
(TOA) brightness temperatures (in the case of thermal IR channels) or
radiances (in the case of visible, NIR and SWIR channels) from all
SLSTR channels, and quality flags, pixel classification information
and meteorological annotations
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SLSTR'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'L1RBT'
, 'RBT'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SLSTR'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
52
Collection("S3_SLSTR_L1RBT_BC003")
| id: |
'S3_SLSTR_L1RBT_BC003', |
| title: |
'SLSTR Level 1B Radiances and Brightness Temperatures (version BC003) - Sentinel-3 - Reprocessed', |
| description: |
'The SLSTR level 1 products contain: the radiances of the 6 visible (VIS), Near Infra-Red (NIR) and
Short Wave Infra-Red (SWIR) bands (on the A and B stripe grids); the Brightness Temperature (BT) for
the 3 Thermal Infra-Red (TIR) bands; the BT for the 2 Fire (FIR) bands. Resolution: 1km at nadir (TIR),
500m (VIS). All are provided for both the oblique and nadir view. These measurements are accompanied
with grid and time information, quality flags, error estimates and meteorological auxiliary data.
Sentinel-3 is part of a series of Sentinel satellites, under the umbrella of the EU Copernicus programme.
This collection contains reprocessed data from baseline collection 003. Operational data can be found
in the corresponding collection.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-04-19 00:00:00+00:00
, 2018-04-04 00:00:00+00:00
]
]
}
}, |
| keywords: |
['SLSTR'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'L1RBT'
, 'RBT'
, 'VIS'
, 'NIR'
, 'SWIR'
, 'BT'
, 'TIR'
, 'FIR'
, 'Reprocessed'
, 'BC003'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SLSTR'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
53
Collection("S3_SLSTR_L1RBT_BC004")
| id: |
'S3_SLSTR_L1RBT_BC004', |
| title: |
'SENTINEL3 SLSTR Level-1 RBT - Reprocessed from BC004', |
| description: |
'SLSTR Level 1B Radiances and Brightness Temperatures (version BC004) - Sentinel 3 - Reprocessed
The SLSTR level 1 products contain: the radiances of the 6 visible (VIS), Near Infra-Red (NIR) and Short Wave
Infra-Red (SWIR) bands (on the A and B stripe grids); the Brightness Temperature (BT) for the 3 Thermal Infra-Red
(TIR) bands; the BT for the 2 Fire (FIR) bands. Resolution: 1km at nadir (TIR), 500m (VIS). All are provided for
both the oblique and nadir view. These measurements are accompanied with grid and time information, quality flags,
error estimates and meteorological auxiliary data. Sentinel-3 is part of a series of Sentinel satellites, under the
umbrella of the EU Copernicus programme. This collection contains reprocessed data from baseline collection 004.
Operational data can be found in the corresponding collection.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2018-05-09 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SLSTR'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'L1RBT'
, 'RBT'
, 'VIS'
, 'NIR'
, 'SWIR'
, 'BT'
, 'TIR'
, 'FIR'
, 'Reprocessed'
, 'BC004'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SLSTR'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
54
Collection("S3_SLSTR_L2")
| id: |
'S3_SLSTR_L2', |
| title: |
'SENTINEL3 SLSTR Level-2', |
| description: |
'The SLSTR Level-2 products are generated in five different types: 1. SL_2_WCT, including the Sea Surface Temperature
for single and dual view, for 2 or 3 channels (internal product only), 2. SL_2_WST, including the Level-2P Sea
surface temperature (provided to the users), 3. SL_2_LST, including the Land Surface Temperature parameters
(provided to the users), 4. SL_2_FRP, including the Fire Radiative Power parameters (provided to the users),
5.SL_2_AOD, including the Aerosol Optical Depth parameters (provided to the users). The Level-2 product are
organized in packages composed of one manifest file and several measurement and annotation data files (between 2
and 21 files depending on the package). The manifest file is in XML format and gathers general information
concerning product and processing. The measurement and annotation data files are in netCDF 4 format, and include
dimensions, variables and associated attributes. Regarding the measurement files: one measurement file, providing
the land surface temperature, associated uncertainties and other supporting fields, is included in the SL_2_LST
packet. The annotation data files are generated from the annotation files included in the SL_1RBT package and their
format is identical to the files in the Level-1 packet.The SL_2_LST packet contains 10 annotation files, providing
the same parameters as in SL_2_WCT and, in addition, some vegetation parameters.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-07-05 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SLSTR'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'L2FRP'
, 'FRP'
, 'L2WCT'
, 'WCT'
, 'L2WST'
, 'WST'
, 'L2AOD'
, 'AOD'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SLSTR'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
55
Collection("S3_SLSTR_L2AOD")
| id: |
'S3_SLSTR_L2AOD', |
| title: |
'SENTINEL3 SLSTR Level-2 AOD', |
| description: |
'The Copernicus NRT S3 AOD processor quantifies the abundance of aerosol particles and monitors their global
distribution and long-range transport, at the scale of 9.5 x 9.5 km2. All observations are made available in
less than three hours from the SLSTR observation sensing time. It is only applicable during daytime.
NOTE: The SLSTR L2 AOD product is generated by EUMETSAT in NRT only. An offline (NTC) AOD product is generated
from SYN data by ESA, exploiting the synergy between the SLSTR and OLCI instruments.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SLSTR'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'L2AOD'
, 'AOD'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SLSTR'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
56
Collection("S3_SLSTR_L2FRP")
| id: |
'S3_SLSTR_L2FRP', |
| title: |
'SENTINEL3 SLSTR Level-2 FRP', |
| description: |
'The SLSTR Level-2 FRP product is providing one measurement data file, FRP_in.nc, with Fire Radiative Power (FRP)
values and associated parameters generated for each fire detected over land and projected on the SLSTR 1 km grid.
The fire detection is based on a mixed thermal band, combining S7 radiometric measurements and,
for pixels associated with a saturated value of S7 (i.e. above 311 K), F1 radiometric measurements.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SLSTR'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'L2FRP'
, 'FRP'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SLSTR'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
57
Collection("S3_SLSTR_L2LST")
| id: |
'S3_SLSTR_L2LST', |
| title: |
'SENTINEL3 SLSTR Level-2 LST', |
| description: |
'The SLSTR Level-2 LST product provides land surface parameters generated on the wide 1 km measurement grid.
It contains measurement file with Land Surface Temperature (LST) values with associated parameters (LST
parameters are computed and provided for each pixel (re-gridded or orphan) included in the 1 km measurement grid)
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SLSTR'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'L2LST'
, 'LST'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SLSTR'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
58
Collection("S3_SLSTR_L2WST")
| id: |
'S3_SLSTR_L2WST', |
| title: |
'SENTINEL3 SLSTR Level-2 WST', |
| description: |
'The SLSTR Level-2 WST product provides water surface parameters generated on the wide 1 km measurement grid.
It contains measurement file with Water Surface Temperature (WST) values with associated parameters (WST
parameters are computed and provided for each pixel (re-gridded or orphan) included in the 1 km measurement grid)
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SLSTR'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'L2WST'
, 'WST'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SLSTR'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
59
Collection("S3_SLSTR_L2WST_BC003")
| id: |
'S3_SLSTR_L2WST_BC003', |
| title: |
'SENTINEL3 SLSTR Level-2 WST Reprocessed from BC003', |
| description: |
'The SLSTR SST has a spatial resolution of 1km at nadir. Skin Sea Surface Temperature following the
GHRSST L2P GDS2 format specification, see https://www.ghrsst.org/ . Sentinel-3 is part of a series of Sentinel
satellites, under the umbrella of the EU Copernicus programme. This collection contains reprocessed data from
baseline collection 003. Operational data can be found in the corresponding collection.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-04-18 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SLSTR'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'L2WST'
, 'WST'
, 'REPROCESSED'
, 'BC003'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SLSTR'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
60
Collection("S3_SRA")
| id: |
'S3_SRA', |
| title: |
'SENTINEL3 SRAL Level-1', |
| description: |
'SRAL Level 1B: Complex echoes (In-phase (I) and Quadrature (Q)) for the Low Resolution Mode (LRM) and/or
Synthetic Aperture Radar (SAR) mode both for C Band and Ku band. When the altimeter is in SAR mode, this product
also contains the so-called Pseudo LRM (PLRM) echoes. - All Sentinel-3 Near Real Time (NRT) products are available
at pick-up point in less than 3h. - All Sentinel-3 Non Time Critical (NTC) products are available at pick-up point
in less than 30 days. - All Sentinel-3 Short Time Critical (STC) products are available at pick-up point in less
than 48 hours. Sentinel-3 is part of a series of Sentinel satellites, under the umbrella of the EU Copernicus programme.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SRA'
, 'SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'RADAR', |
|
|
61
Collection("S3_SRA_1A_BC004")
| id: |
'S3_SRA_1A_BC004', |
| title: |
'SENTINEL3 SRAL Level-1A Unpacked - Reprocessed from BC004', |
| description: |
'SRAL Level 1A Unpacked L0 Complex Echoes (version BC004) - Sentinel-3 - Reprocessed
Fundamental science and engineering product development supporting operational users. This product is most
relevant to SAR processing specialists allowing fundamental studies on SAR processing such as Doppler beam
formation and for calibration studies using ground-based Transponders. Sentinel-3 is part of a series of Sentinel
satellites, under the umbrella of the EU Copernicus programme. This collection contains reprocessed data from
baseline collection 004. Operational data can be found in the corresponding collection.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-03-01 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SRA'
, 'SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'L1A'
, 'REPROCESSED'
, 'BC004'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1A', |
| eodag:sensor_type: |
'RADAR', |
|
|
62
Collection("S3_SRA_1A_BC005")
| id: |
'S3_SRA_1A_BC005', |
| title: |
'SRAL Level 1A Unpacked L0 Complex Echoes (version BC005) - Sentinel-3 - Reprocessed', |
| description: |
'Fundamental science and engineering product development supporting operational users. This product is most relevant
to SAR processing specialists allowing fundamental studies on SAR processing such as Doppler beam formation and for
calibration studies using ground-based Transponders. Sentinel-3 is part of a series of Sentinel satellites, under
the umbrella of the EU Copernicus programme. This dataset contains reprocessed data from Baseline Collection 005,
and is continued by the operational NTC data stream from 10/Mar/2023 onwards.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-05-05 00:00:00+00:00
, 2023-03-09 00:00:00+00:00
]
]
}
}, |
| keywords: |
['SRA'
, 'SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'L1A'
, 'REPROCESSED'
, 'BC005'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1A', |
| eodag:sensor_type: |
'RADAR', |
|
|
63
Collection("S3_SRA_1B_BC004")
| id: |
'S3_SRA_1B_BC004', |
| title: |
'SENTINEL3 SRAL Level-1B - Reprocessed from BC004', |
| description: |
'SRAL Level 1B (version BC004) - Sentinel-3 - Reprocessed
SRAL Level 1B: Complex echoes (In-phase (I) and Quadrature (Q)) for the Low Resolution Mode (LRM) and/or
Synthetic Aperture Radar (SAR) mode both for C Band and Ku band. When the altimeter is in SAR mode, this product
also contains the so-called Pseudo LRM (PLRM) echoes. Sentinel-3 is part of a series of Sentinel satellites, under
the umbrella of the EU Copernicus programme. This collection contains reprocessed data from baseline collection 004.
Operational data can be found in the corresponding collection.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-03-01 00:00:00+00:00
, 2019-12-31 00:00:00+00:00
]
]
}
}, |
| keywords: |
['SRA'
, 'SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'L1B'
, 'REPROCESSED'
, 'BC004'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'RADAR', |
|
|
64
Collection("S3_SRA_1B_BC005")
| id: |
'S3_SRA_1B_BC005', |
| title: |
'SRAL Level 1B (version BC005) - Sentinel-3 - Reprocessed', |
| description: |
'SRAL Level 1B: Complex echoes (In-phase (I) and Quadrature (Q)) for the Low Resolution Mode (LRM) and/or Synthetic
Aperture Radar (SAR) mode both for C Band and Ku band. When the altimeter is in SAR mode, this product also contains
the so-called Pseudo LRM (PLRM) echoes. Sentinel-3 is part of a series of Sentinel satellites, under the umbrella
of the EU Copernicus programme. This dataset contains reprocessed data from Baseline Collection 005, and is continued
by the operational NTC data stream from 10/Mar/2023 onwards.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-05-05 00:00:00+00:00
, 2023-03-09 00:00:00+00:00
]
]
}
}, |
| keywords: |
['SRA'
, 'SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'L1B'
, 'REPROCESSED'
, 'BC005'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'RADAR', |
|
|
65
Collection("S3_SRA_A")
| id: |
'S3_SRA_A', |
| title: |
'SENTINEL3 SRAL Level-1 SRA_A', |
| description: |
'A Level 1A SRAL product contains one "measurement data file" containing the L1A measurements parameters:
ECHO_SAR_Ku: L1A Tracking measurements (sorted and calibrated) in SAR mode - Ku-band (80-Hz)
ECHO_PLRM: L1A Tracking measurements (sorted and calibrated) in pseudo-LRM mode - Ku and C bands (80-Hz)
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SRA'
, 'SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'RADAR', |
|
|
66
Collection("S3_SRA_BS")
| id: |
'S3_SRA_BS', |
| title: |
'SENTINEL3 SRAL Level-1 SRA_BS', |
| description: |
'A Level 1B-S SRAL product contains one "measurement data file" containing the L1b measurements parameters:
ECHO_SAR_Ku : L1b Tracking measurements in SAR mode - Ku band (20-Hz) as defined in the L1b MEAS product
completed with SAR expert information
ECHO_PLRM : L1b Tracking measurements in pseudo-LRM mode - Ku and C bands (20-Hz) as defined in the L1b
MEAS product
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SRA'
, 'SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1', |
| eodag:sensor_type: |
'RADAR', |
|
|
67
Collection("S3_SRA_BS_BC004")
| id: |
'S3_SRA_BS_BC004', |
| title: |
'SENTINEL3 SRAL Level-1B Stack Echoes - Reprocessed from BC004', |
| description: |
'SRAL Level 1B Stack Echoes (version BC004) - Sentinel-3 - Reprocessed
SRAL Level 1B: Complex echoes (In-phase (I) and Quadrature (Q)) for the Low Resolution Mode (LRM) and/or Synthetic
Aperture Radar (SAR) mode both for C Band and Ku band. When the altimeter is in SAR mode, this product also
contains the so-called Pseudo LRM (PLRM) echoes. Complex (In-phase and Quadrature) echoes (I's and Q;s) after
slant/Doppler range correction. This product is most relevant to geophysical retrieval algorithm developers
(over ocean, land and ice surfaces), surface characterisations studies (e.g. impact of sea state bias, wave
directional effects etc) and Quality Control systems. Sentinel-3 is part of a series of Sentinel satellites, under
the umbrella of the EU Copernicus programme. This collection contains reprocessed data from baseline collection 004.
Operational data can be found in the corresponding collection.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-03-01 00:00:00+00:00
, 2019-12-31 00:00:00+00:00
]
]
}
}, |
| keywords: |
['SRA'
, 'SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'L1B'
, 'REPROCESSED'
, 'STACK'
, 'ECHOES'
, 'BC004'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'RADAR', |
|
|
68
Collection("S3_SRA_BS_BC005")
| id: |
'S3_SRA_BS_BC005', |
| title: |
'SRAL Level 1B Stack Echoes (version BC005) - Sentinel-3 - Reprocessed', |
| description: |
'SRAL Level 1B: Complex echoes (In-phase (I) and Quadrature (Q)) for the Low Resolution Mode (LRM) and/or Synthetic
Aperture Radar (SAR) mode both for C Band and Ku band. When the altimeter is in SAR mode, this product also
contains the so-called Pseudo LRM (PLRM) echoes. Complex (In-phase and Quadrature) echoes (I's and Q;s) after
slant/Doppler range correction. This product is most relevant to geophysical retrieval algorithm developers
(over ocean, land and ice surfaces), surface characterisations studies (e.g. impact of sea state bias, wave
directional effects etc) and Quality Control systems. Sentinel-3 is part of a series of Sentinel satellites, under
the umbrella of the EU Copernicus programme. This dataset contains reprocessed data from Baseline Collection 005,
and is continued by the operational NTC data stream from 10/Mar/2023 onwards.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-05-05 00:00:00+00:00
, 2023-03-09 00:00:00+00:00
]
]
}
}, |
| keywords: |
['SRA'
, 'SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L1'
, 'L1B'
, 'REPROCESSED'
, 'STACK'
, 'ECHOES'
, 'BC005'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'RADAR', |
|
|
69
Collection("S3_SY_AOD")
| id: |
'S3_SY_AOD', |
| title: |
'SENTINEL3 SYNERGY Level-2 AOD', |
| description: |
'The Level-2 SYN AOD product (SY_2_AOD) is produced by a dedicated processor including the whole
SYN L1 processing module and a global synergy level 2 processing module retrieving, over land and
sea, aerosol optical thickness. The resolution of this product is wider than classic S3 products,
as the dataset are provided on a 4.5 km² resolution
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SYNERGY'
, 'SY'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'AOD'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SYNERGY'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL,RADAR', |
|
|
70
Collection("S3_SY_SYN")
| id: |
'S3_SY_SYN', |
| title: |
'SENTINEL3 SYNERGY Level-2 SYN', |
| description: |
'The Level-2 SYN product (SY_2_SYN) is produced by the Synergy Level-1/2 SDR software and contains
surface reflectance and aerosol parameters over land. All measurement datasets are provided on the
OLCI image grid, similar to the one included in the OLCI L1b product.
Some sub-sampled annotations and atmospheric datasets are provided on the OLCI tie-points grid.
Several associated variables are also provided in annotation data files.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SYNERGY'
, 'SY'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'SYN'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SYNERGY'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'OPTICAL,RADAR', |
|
|
71
Collection("S3_SY_V10")
| id: |
'S3_SY_V10', |
| title: |
'SENTINEL3 SYNERGY Level-2 V10', |
| description: |
'The Level-2 VG1 and V10 SYN products (SY_2_VG1 and SY_2_V10 respectively) are produced by the
SYNERGY Level-2 processor and contain 1 km VEGETATION-like product, 1 and 10 days synthesis surface
reflectances and NDVI. The product grid and the four spectral bands are similar to the SYN Level-2
VGP product.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SYNERGY'
, 'SY'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'V10'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SYNERGY'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'LEVEL-2W', |
| eodag:sensor_type: |
'OPTICAL,RADAR', |
|
|
72
Collection("S3_SY_VG1")
| id: |
'S3_SY_VG1', |
| title: |
'SENTINEL3 SYNERGY Level-2 VG1', |
| description: |
'The Level-2 VG1 and V10 SYN products (SY_2_VG1 and SY_2_V10 respectively) are produced by the
SYNERGY Level-2 processor and contain 1 km VEGETATION-like product, 1 and 10 days synthesis surface
reflectances and NDVI. The product grid and the four spectral bands are similar to the SYN Level-2
VGP product.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SYNERGY'
, 'SY'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'VG1'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SYNERGY'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'LEVEL-2', |
| eodag:sensor_type: |
'OPTICAL,RADAR', |
|
|
73
Collection("S3_SY_VGP")
| id: |
'S3_SY_VGP', |
| title: |
'SENTINEL3 SYNERGY Level-2 VGP', |
| description: |
'The Level-2 VGP SYN product (SY_2_VGP) is produced by the Global Synergy Level-1/2 software and
contains 1 km VEGETATION-like product TOA reflectances. The "1 km VEGETATION-like product" label
means that measurements are provided on a regular latitude-longitude grid, with an equatorial
sampling distance of approximately 1 km. This product is restricted in longitude, including only filled ones.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SYNERGY'
, 'SY'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'VGP'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SYNERGY'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'LEVEL-2', |
| eodag:sensor_type: |
'OPTICAL,RADAR', |
|
|
74
Collection("S3_WAT")
| id: |
'S3_WAT', |
| title: |
'SENTINEL3 SRAL Level-2 WAT', |
| description: |
'The products contain the typical altimetry measurements, like the altimeter range, the sea surface height, the wind
speed, significant wave height and all required geophysical corrections and related flags. Also the sea Ice
freeboard measurement is included. The measurements in the standard data file provide the measurements in low
(1 Hz = approx. 7km) and high resolution (20 Hz = approx. 300 m), in LRM mode or in SAR mode, for both C-band and
Ku band. The SAR mode is the default mode. The reduced measurement data file contains 1 Hz measurements only. The
enhanced measurement data file contains also the waveforms and associated parameters and the pseudo LRM measurements
when in SAR mode. This product contains the following datasets: Sea Level Global(NRT) (PDS_MG3_CORE_14_GLONRT),
Sea Level Global Reduced(NRT)(PDS_MG3_CORE_14_GLONRT_RD), Sea Level Global Standard(NRT) (PDS_MG3_CORE_14_GLONRT_SD),
Sea Level Global Enhanced(NRT) (PDS_MG3_CORE_14_GLONRT_EN) - All Sentinel-3 NRT products are available at pick-up
point in less than 3h. - All Sentinel-3 Non Time Critical (NTC) products are available at pick-up point in less
than 30 days - All Sentinel-3 Short Time Critical (STC) products are available at pick-up point in less than 48
hours Sentinel-3 is part of a series of Sentinel satellites, under the umbrella of the EU Copernicus programme.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-02-16 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'WAT'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'RADAR', |
|
|
75
Collection("S3_WAT_BC004")
| id: |
'S3_WAT_BC004', |
| title: |
'SRAL Level 2 Altimetry Global - Reprocessed from BC004', |
| description: |
'The products contain the typical altimetry measurements, like the altimeter range, the sea surface height, the wind
speed, significant wave height and all required geophysical corrections and related flags. Also the sea Ice
freeboard measurement is included. The measurements in the standard data file provide the measurements in low
(1 Hz = approx. 7km) and high resolution (20 Hz = approx. 300 m), in LRM mode or in SAR mode, for both C-band and
Ku band. The SAR mode is the default mode. The reduced measurement data file contains 1 Hz measurements only. The
enhanced measurement data file contains also the waveforms and associated parameters and the pseudo LRM
measurements when in SAR mode. Sentinel-3 is part of a series of Sentinel satellites, under the umbrella of the EU
Copernicus programme. This collection contains reprocessed data from baseline collection 004. Operational data can
be found in the corresponding collection.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-03-01 00:00:00+00:00
, 2019-12-31 00:00:00+00:00
]
]
}
}, |
| keywords: |
['SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'WAT'
, 'REPROCESSED'
, 'BC004'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'RADAR', |
|
|
76
Collection("S3_WAT_BC005")
| id: |
'S3_WAT_BC005', |
| title: |
'SRAL Level 2 Altimetry Global (version BC005) - Sentinel-3 - Reprocessed', |
| description: |
'The products contain the typical altimetry measurements, like the altimeter range, the sea surface height, the wind
speed, significant wave height and all required geophysical corrections and related flags. Also the sea Ice
freeboard measurement is included. The measurements in the standard data file provide the measurements in low
(1 Hz = approx. 7km) and high resolution (20 Hz = approx. 300 m), in LRM mode or in SAR mode, for both C-band and
Ku band. The SAR mode is the default mode. The reduced measurement data file contains 1 Hz measurements only. The
enhanced measurement data file contains also the waveforms and associated parameters and the pseudo LRM
measurements when in SAR mode. Sentinel-3 is part of a series of Sentinel satellites, under the umbrella of the EU
Copernicus programme. This collection contains reprocessed data from baseline collection 004. Operational data can
be found in the corresponding collection.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2016-05-05 00:00:00+00:00
, 2023-03-09 00:00:00+00:00
]
]
}
}, |
| keywords: |
['SRAL'
, 'SENTINEL'
, 'SENTINEL3'
, 'S3'
, 'S3A'
, 'S3B'
, 'L2'
, 'WAT'
, 'REPROCESSED'
, 'BC005'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL3', |
| instruments: |
['SRAL'
], |
| platform: |
'S3A,S3B', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'RADAR', |
|
|
77
Collection("S5P_L1B_IR_ALL")
| id: |
'S5P_L1B_IR_ALL', |
| title: |
'Sentinel-5 Precursor Level 1B Irradiances for the SWIR and UNV bands', |
| description: |
'Solar irradiance spectra for all bands (UV1-6 and SWIR)
The TROPOMI instrument is a space-borne, nadir-viewing, imaging spectrometer covering wavelength bands between the
ultraviolet and the shortwave infrared. The instrument, the single payload of the Sentinel-5P spacecraft, uses
passive remote sensing techniques to attain its objective by measuring, at the Top Of Atmosphere (TOA), the solar
radiation reflected by and radiated from the earth. The instrument operates in a push-broom configuration
(non-scanning), with a swath width of ~2600 km on the Earth's surface. The typical pixel size (near nadir) will
be 7x3.5 km2 for all spectral bands, with the exception of the UV1 band (7x28 km2) and SWIR bands (7x7 km2).
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L1'
, 'L1B'
, 'TROPOMI'
, 'IR'
, 'SIR'
, 'SWIR'
, 'Irradiances'
, 'UVN'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
78
Collection("S5P_L1B_IR_SIR")
| id: |
'S5P_L1B_IR_SIR', |
| title: |
'Sentinel-5 Precursor Level 1B Irradiances for the SWIR bands', |
| description: |
'Solar irradiance spectra for the SWIR bands (band 7 and band 8).
TROPOMI utilises a single telescope to form an image of the target area onto a rectangular slit that acts as the
entrance slit of the spectrometer system. There are four different spectrometers, each with its own optics and
detector: mediumwave ultraviolet (UV), longwave ultraviolet combined with visible (UVIS), near infrared (NIR), and
shortwave infrared (SWIR). The spectrometers for UV, UVIS and NIR are jointly referred to as UVN. Radiation for the
SWIR spectrometer is transferred by an optical relay part in the UVN system from the telescope to an interface
position (the pupil stop) for the SWIR spectrometer. This is done because of the more stringent thermal requirements
on the SWIR part of the instrument.
Each of the detectors is divided in two halves, which yields a total of eight spectral bands.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L1'
, 'L1B'
, 'TROPOMI'
, 'IR'
, 'SIR'
, 'SWIR'
, 'Irradiances'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
79
Collection("S5P_L1B_IR_UVN")
| id: |
'S5P_L1B_IR_UVN', |
| title: |
'Sentinel-5 Precursor Level 1B Irradiances for the UVN bands', |
| description: |
'Solar irradiance spectra for the UVN bands (band 1 through band 6).
TROPOMI utilises a single telescope to form an image of the target area onto a rectangular slit that acts as the
entrance slit of the spectrometer system. There are four different spectrometers, each with its own optics and
detector: mediumwave ultraviolet (UV), longwave ultraviolet combined with visible (UVIS), near infrared (NIR), and
shortwave infrared (SWIR). The spectrometers for UV, UVIS and NIR are jointly referred to as UVN. Radiation for the
SWIR spectrometer is transferred by an optical relay part in the UVN system from the telescope to an interface
position (the pupil stop) for the SWIR spectrometer. This is done because of the more stringent thermal requirements
on the SWIR part of the instrument.
Each of the detectors is divided in two halves, which yields a total of eight spectral bands.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L1'
, 'L1B'
, 'TROPOMI'
, 'IR'
, 'UVN'
, 'Irradiances'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
80
Collection("S5P_L1B_RA_BD1")
| id: |
'S5P_L1B_RA_BD1', |
| title: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 1', |
| description: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 1.
TROPOMI utilises a single telescope to form an image of the target area onto a rectangular slit that acts as the
entrance slit of the spectrometer system. There are four different spectrometers, each with its own optics and
detector: mediumwave ultraviolet (UV), longwave ultraviolet combined with visible (UVIS), near infrared (NIR), and
shortwave infrared (SWIR). The spectrometers for UV, UVIS and NIR are jointly referred to as UVN. Radiation for the
SWIR spectrometer is transferred by an optical relay part in the UVN system from the telescope to an interface
position (the pupil stop) for the SWIR spectrometer. This is done because of the more stringent thermal requirements
on the SWIR part of the instrument.
Each of the detectors is divided in two halves, which yields a total of eight spectral bands.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L1'
, 'L1B'
, 'TROPOMI'
, 'RA'
, 'Radiances'
, 'BD1'
, 'BAND1'
, 'B01'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
81
Collection("S5P_L1B_RA_BD2")
| id: |
'S5P_L1B_RA_BD2', |
| title: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 2', |
| description: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 2.
TROPOMI utilises a single telescope to form an image of the target area onto a rectangular slit that acts as the
entrance slit of the spectrometer system. There are four different spectrometers, each with its own optics and
detector: mediumwave ultraviolet (UV), longwave ultraviolet combined with visible (UVIS), near infrared (NIR), and
shortwave infrared (SWIR). The spectrometers for UV, UVIS and NIR are jointly referred to as UVN. Radiation for the
SWIR spectrometer is transferred by an optical relay part in the UVN system from the telescope to an interface
position (the pupil stop) for the SWIR spectrometer. This is done because of the more stringent thermal requirements
on the SWIR part of the instrument.
Each of the detectors is divided in two halves, which yields a total of eight spectral bands.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L1'
, 'L1B'
, 'TROPOMI'
, 'RA'
, 'Radiances'
, 'BD2'
, 'BAND2'
, 'B02'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
82
Collection("S5P_L1B_RA_BD3")
| id: |
'S5P_L1B_RA_BD3', |
| title: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 3', |
| description: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 3.
TROPOMI utilises a single telescope to form an image of the target area onto a rectangular slit that acts as the
entrance slit of the spectrometer system. There are four different spectrometers, each with its own optics and
detector: mediumwave ultraviolet (UV), longwave ultraviolet combined with visible (UVIS), near infrared (NIR), and
shortwave infrared (SWIR). The spectrometers for UV, UVIS and NIR are jointly referred to as UVN. Radiation for the
SWIR spectrometer is transferred by an optical relay part in the UVN system from the telescope to an interface
position (the pupil stop) for the SWIR spectrometer. This is done because of the more stringent thermal requirements
on the SWIR part of the instrument.
Each of the detectors is divided in two halves, which yields a total of eight spectral bands.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L1'
, 'L1B'
, 'TROPOMI'
, 'RA'
, 'Radiances'
, 'BD3'
, 'BAND3'
, 'B03'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
83
Collection("S5P_L1B_RA_BD4")
| id: |
'S5P_L1B_RA_BD4', |
| title: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 4', |
| description: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 4.
TROPOMI utilises a single telescope to form an image of the target area onto a rectangular slit that acts as the
entrance slit of the spectrometer system. There are four different spectrometers, each with its own optics and
detector: mediumwave ultraviolet (UV), longwave ultraviolet combined with visible (UVIS), near infrared (NIR), and
shortwave infrared (SWIR). The spectrometers for UV, UVIS and NIR are jointly referred to as UVN. Radiation for the
SWIR spectrometer is transferred by an optical relay part in the UVN system from the telescope to an interface
position (the pupil stop) for the SWIR spectrometer. This is done because of the more stringent thermal requirements
on the SWIR part of the instrument.
Each of the detectors is divided in two halves, which yields a total of eight spectral bands.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L1'
, 'L1B'
, 'TROPOMI'
, 'RA'
, 'Radiances'
, 'BD4'
, 'BAND4'
, 'B04'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
84
Collection("S5P_L1B_RA_BD5")
| id: |
'S5P_L1B_RA_BD5', |
| title: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 5', |
| description: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 5.
TROPOMI utilises a single telescope to form an image of the target area onto a rectangular slit that acts as the
entrance slit of the spectrometer system. There are four different spectrometers, each with its own optics and
detector: mediumwave ultraviolet (UV), longwave ultraviolet combined with visible (UVIS), near infrared (NIR), and
shortwave infrared (SWIR). The spectrometers for UV, UVIS and NIR are jointly referred to as UVN. Radiation for the
SWIR spectrometer is transferred by an optical relay part in the UVN system from the telescope to an interface
position (the pupil stop) for the SWIR spectrometer. This is done because of the more stringent thermal requirements
on the SWIR part of the instrument.
Each of the detectors is divided in two halves, which yields a total of eight spectral bands.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L1'
, 'L1B'
, 'TROPOMI'
, 'RA'
, 'Radiances'
, 'BD5'
, 'BAND5'
, 'B05'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
85
Collection("S5P_L1B_RA_BD6")
| id: |
'S5P_L1B_RA_BD6', |
| title: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 6', |
| description: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 6.
TROPOMI utilises a single telescope to form an image of the target area onto a rectangular slit that acts as the
entrance slit of the spectrometer system. There are four different spectrometers, each with its own optics and
detector: mediumwave ultraviolet (UV), longwave ultraviolet combined with visible (UVIS), near infrared (NIR), and
shortwave infrared (SWIR). The spectrometers for UV, UVIS and NIR are jointly referred to as UVN. Radiation for the
SWIR spectrometer is transferred by an optical relay part in the UVN system from the telescope to an interface
position (the pupil stop) for the SWIR spectrometer. This is done because of the more stringent thermal requirements
on the SWIR part of the instrument.
Each of the detectors is divided in two halves, which yields a total of eight spectral bands.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L1'
, 'L1B'
, 'TROPOMI'
, 'RA'
, 'Radiances'
, 'BD6'
, 'BAND6'
, 'B06'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
86
Collection("S5P_L1B_RA_BD7")
| id: |
'S5P_L1B_RA_BD7', |
| title: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 7', |
| description: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 7.
TROPOMI utilises a single telescope to form an image of the target area onto a rectangular slit that acts as the
entrance slit of the spectrometer system. There are four different spectrometers, each with its own optics and
detector: mediumwave ultraviolet (UV), longwave ultraviolet combined with visible (UVIS), near infrared (NIR), and
shortwave infrared (SWIR). The spectrometers for UV, UVIS and NIR are jointly referred to as UVN. Radiation for the
SWIR spectrometer is transferred by an optical relay part in the UVN system from the telescope to an interface
position (the pupil stop) for the SWIR spectrometer. This is done because of the more stringent thermal requirements
on the SWIR part of the instrument.
Each of the detectors is divided in two halves, which yields a total of eight spectral bands.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L1'
, 'L1B'
, 'TROPOMI'
, 'RA'
, 'Radiances'
, 'BD7'
, 'BAND7'
, 'B07'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
87
Collection("S5P_L1B_RA_BD8")
| id: |
'S5P_L1B_RA_BD8', |
| title: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 8', |
| description: |
'Sentinel-5 Precursor Level 1B Radiances for spectral band 8.
TROPOMI utilises a single telescope to form an image of the target area onto a rectangular slit that acts as the
entrance slit of the spectrometer system. There are four different spectrometers, each with its own optics and
detector: mediumwave ultraviolet (UV), longwave ultraviolet combined with visible (UVIS), near infrared (NIR), and
shortwave infrared (SWIR). The spectrometers for UV, UVIS and NIR are jointly referred to as UVN. Radiation for the
SWIR spectrometer is transferred by an optical relay part in the UVN system from the telescope to an interface
position (the pupil stop) for the SWIR spectrometer. This is done because of the more stringent thermal requirements
on the SWIR part of the instrument.
Each of the detectors is divided in two halves, which yields a total of eight spectral bands.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L1'
, 'L1B'
, 'TROPOMI'
, 'RA'
, 'Radiances'
, 'BD8'
, 'BAND8'
, 'B08'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
88
Collection("S5P_L2_AER_AI")
| id: |
'S5P_L2_AER_AI', |
| title: |
'Sentinel-5 Precursor Level 2 Ultraviolet Aerosol Index', |
| description: |
'TROPOMI aerosol index is referred to as the Ultraviolet Aerosol Index (UVAI). The relatively simple calculation of
the Aerosol Index is based on wavelength dependent changes in Rayleigh scattering in the UV spectral range where
ozone absorption is very small. UVAI can also be calculated in the presence of clouds so that daily, global coverage
is possible. This is ideal for tracking the evolution of episodic aerosol plumes from dust outbreaks, volcanic ash,
and biomass burning.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'AER'
, 'AI'
, 'Ultraviolet'
, 'Aerosol'
, 'Index'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
89
Collection("S5P_L2_AER_LH")
| id: |
'S5P_L2_AER_LH', |
| title: |
'Sentinel-5 Precursor Level 2 Aerosol Layer Height', |
| description: |
'The TROPOMI Aerosol Layer Height product focuses on retrieval of vertically localised aerosol layers in the free
troposphere, such as desert dust, biomass burning aerosol, or volcanic ash plumes. The height of such layers is
retrieved for cloud-free conditions. Height information for aerosols in the free troposphere is particularly
important for aviation safety. Scientific applications include radiative forcing studies, long-range transport
modelling and studies of cloud formation processes. Aerosol height information also helps to interpret the UV
Aerosol Index (UVAI) in terms of aerosol absorption as the index is strongly height-dependent.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'AER'
, 'LH'
, 'Aerosol'
, 'Layer'
, 'Height'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
90
Collection("S5P_L2_CH4")
| id: |
'S5P_L2_CH4', |
| title: |
'Sentinel-5 Precursor Level 2 Methane', |
| description: |
'Methane (CH4) is, after carbon dioxide (CO2), the most important contributor to the anthropogenically enhanced
greenhouse effect. Roughly three-quarters of methane emissions are anthropogenic and as such it is important to
continue the record of satellite-based measurements. TROPOMI aims at providing CH4 column concentrations with high
sensitivity to the Earth's surface, good spatio/temporal coverage, and sufficient accuracy to facilitate inverse
modelling of sources and sinks.
The output product consists of the retrieved methane column and a row vector referred to as the column averaging
kernel A. The column averaging kernel describes how the retrieved column relates to the true profile and should be
used in validation exercises (when possible) or use of the product in source/sink inverse modelling. The output
product also contains altitude levels of the layer interfaces to which the column averaging kernel corresponds.
Additional output for Level-2 data products: viewing geometry, precision of retrieved methane, residuals of the fit,
quality flags (cloudiness, terrain roughness etc.) and retrieved albedo and aerosol properties. The latter
properties are required for a posteriori filtering and for estimation of total retrieval error.
The Sentinel-5 Precursor mission flies in loose formation (about 3.5 - 5 minutes behind) with the S-NPP
(SUOMI-National Polar-orbiting Partnership) mission to use VIIRS (Visible Infrared Imaging Radiometer Suite) cloud
information to select cloud free TROPOMI pixels for high quality methane retrieval.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'CH4'
, 'Methane'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
91
Collection("S5P_L2_CLOUD")
| id: |
'S5P_L2_CLOUD', |
| title: |
'Sentinel-5 Precursor Level 2 Cloud', |
| description: |
'The TROPOMI instrument, single payload onboard Sentinel-5 Precursor, retrieves operationally the most important
quantities for cloud correction of satellite trace gas retrievals: cloud fraction, cloud optical thickness (albedo),
and cloud-top pressure (height). Cloud parameters from TROPOMI are not only used for enhancing the accuracy of trace
gas retrievals, but also to extend the satellite data record of cloud information derived from oxygen A-band
measurements initiated with GOME.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'CLOUD'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
92
Collection("S5P_L2_CO")
| id: |
'S5P_L2_CO', |
| title: |
'Sentinel-5 Precursor Level 2 Carbon Monoxide', |
| description: |
'The TROPOMI instrument, single payload onboard Sentinel-5 Precursor, retrieves the CO global abundance exploiting
clear-sky and cloudy-sky Earth radiance measurements in the 2.3 µm spectral range of the shortwave infrared (SWIR)
part of the solar spectrum. TROPOMI clear sky observations provide CO total columns with sensitivity to the
tropospheric boundary layer. For cloudy atmospheres, the column sensitivity changes according to the light path.
The TROPOMI CO retrieval uses the same method employed by SCIAMACHY.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'CO'
, 'Carbon'
, 'Monoxide'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
93
Collection("S5P_L2_HCHO")
| id: |
'S5P_L2_HCHO', |
| title: |
'Sentinel-5 Precursor Level 2 Formaldehyde', |
| description: |
'Formaldehyde is an intermediate gas in almost all oxidation chains of Non-Methane Volatile Organic Compounds
(NMVOC), leading eventually to CO2. NMVOCs are, together with NOx, CO and CH4, among the most important precursors
of tropospheric O3. The major HCHO source in the remote atmosphere is CH4 oxidation. Over the continents, the
oxidation of higher NMVOCs emitted from vegetation, fires, traffic and industrial sources results in important and
localised enhancements of the HCHO levels.
In addition to the main product results, such as HCHO slant column, vertical column and air mass factor, the level 2
data files contain several additional parameters and diagnostic information.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'HCHO'
, 'Formaldehyde'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
94
Collection("S5P_L2_IR_ALL")
| id: |
'S5P_L2_IR_ALL', |
| title: |
'Sentinel-5 Precursor Level 2 Data', |
| description: |
'The TROPOMI instrument is a space-borne, nadir-viewing, imaging spectrometer covering wavelength bands between the
ultraviolet and the shortwave infrared. The instrument, the single payload of the Sentinel-5P spacecraft, uses
passive remote sensing techniques to attain its objective by measuring, at the Top Of Atmosphere (TOA), the solar
radiation reflected by and radiated from the earth. The instrument operates in a push-broom configuration
(non-scanning), with a swath width of ~2600 km on the Earth's surface. The typical pixel size (near nadir) will
be 7x3.5 km2 for all spectral bands, with the exception of the UV1 band (7x28 km2) and SWIR bands (7x7 km2).
Level 2 data provides total columns of ozone, sulfur dioxide, nitrogen dioxide, carbon monoxide, formaldehyde,
tropospheric columns of ozone, vertical profiles of ozone and cloud & aerosol information.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2018-04-01 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
95
Collection("S5P_L2_NO2")
| id: |
'S5P_L2_NO2', |
| title: |
'Sentinel-5 Precursor Level 2 Nitrogen Dioxide', |
| description: |
'The TROPOMI instrument, single payload onboard Sentinel-5 Precursor, retrieves operationally tropospheric and
stratospheric NO2 column products. The TROPOMI NO2 data products pose an improvement over previous NO2 data sets,
particularly in their unprecedented spatial resolution, but also in the separation of the stratospheric and
tropospheric contributions of the retrieved slant columns, and in the calculation of the air-mass factors used to
convert slant to total columns.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'NO2'
, 'Nitrogen'
, 'Dioxide'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
96
Collection("S5P_L2_NP_BD3")
| id: |
'S5P_L2_NP_BD3', |
| title: |
'Sentinel-5 Precursor Level 2 NPP Cloud for band 3', |
| description: |
'S5P-NPP Cloud for spectral band 3.
The S5P level 2 methane product is dependent on having information on cloud occurrence at spatial resolution finer
than that achievable from TROPOMI itself. This information is also useful for other purposes, including assessing
the influence of cloud on other L2 products and issues related to spatial co-registration. A level 2 auxiliary
product was therefore developed to describe cloud in the TROPOMI field of view (FOV), using co-located observations
of VIIRS (Visible Infra-red Imaging Radiometer Suite) on the U.S. S-NPP (Suomi - National Polar-orbiting
Partnership). S5P flies in a so-called loose formation with the S-NPP with a temporal separation between them of
less than 5 minutes.
The main information contained in the S5P-NPP product is:
1. A statistical summary for each S5P FOV of the NPP-VIIRS L2 Cloud Mask (VCM).
2. The mean and standard deviation of the sun-normalised radiance in a number of VIIRS moderate resolution bands.
This information is provided for three S5P spectral bands (to account for differences in spatial sampling).
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'NP'
, 'NPP'
, 'Cloud'
, 'BD3'
, 'B03'
, 'BAND3'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
97
Collection("S5P_L2_NP_BD6")
| id: |
'S5P_L2_NP_BD6', |
| title: |
'Sentinel-5 Precursor Level 2 NPP Cloud for band 6', |
| description: |
'S5P-NPP Cloud for spectral band 6.
The S5P level 2 methane product is dependent on having information on cloud occurrence at spatial resolution finer
than that achievable from TROPOMI itself. This information is also useful for other purposes, including assessing
the influence of cloud on other L2 products and issues related to spatial co-registration. A level 2 auxiliary
product was therefore developed to describe cloud in the TROPOMI field of view (FOV), using co-located observations
of VIIRS (Visible Infra-red Imaging Radiometer Suite) on the U.S. S-NPP (Suomi - National Polar-orbiting
Partnership). S5P flies in a so-called loose formation with the S-NPP with a temporal separation between them of
less than 5 minutes.
The main information contained in the S5P-NPP product is:
1. A statistical summary for each S5P FOV of the NPP-VIIRS L2 Cloud Mask (VCM).
2. The mean and standard deviation of the sun-normalised radiance in a number of VIIRS moderate resolution bands.
This information is provided for three S5P spectral bands (to account for differences in spatial sampling).
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'NP'
, 'NPP'
, 'Cloud'
, 'BD6'
, 'B06'
, 'BAND6'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
98
Collection("S5P_L2_NP_BD7")
| id: |
'S5P_L2_NP_BD7', |
| title: |
'Sentinel-5 Precursor Level 2 NPP Cloud for band 7', |
| description: |
'S5P-NPP Cloud for spectral band 7.
The S5P level 2 methane product is dependent on having information on cloud occurrence at spatial resolution finer
than that achievable from TROPOMI itself. This information is also useful for other purposes, including assessing
the influence of cloud on other L2 products and issues related to spatial co-registration. A level 2 auxiliary
product was therefore developed to describe cloud in the TROPOMI field of view (FOV), using co-located observations
of VIIRS (Visible Infra-red Imaging Radiometer Suite) on the U.S. S-NPP (Suomi - National Polar-orbiting
Partnership). S5P flies in a so-called loose formation with the S-NPP with a temporal separation between them of
less than 5 minutes.
The main information contained in the S5P-NPP product is:
1. A statistical summary for each S5P FOV of the NPP-VIIRS L2 Cloud Mask (VCM).
2. The mean and standard deviation of the sun-normalised radiance in a number of VIIRS moderate resolution bands.
This information is provided for three S5P spectral bands (to account for differences in spatial sampling).
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'NP'
, 'NPP'
, 'Cloud'
, 'BD7'
, 'B07'
, 'BAND7'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
99
Collection("S5P_L2_O3")
| id: |
'S5P_L2_O3', |
| title: |
'Sentinel-5 Precursor Level 2 Ozone', |
| description: |
'Ozone (O3) is of crucial importance for the equilibrium of the Earth's atmosphere. In the stratosphere, the ozone
layer shields the biosphere from dangerous solar ultraviolet radiation. In the troposphere, it acts as an efficient
cleansing agent, but at high concentration it also becomes harmful to the health of humans, animals, and vegetation.
Ozone is also an important greenhouse-gas contributor to ongoing climate change.
These products are provided in NetCDF-CF format and contain total ozone, ozone temperature, and error information
including averaging kernels.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'O3'
, 'Ozone'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
100
Collection("S5P_L2_O3_PR")
| id: |
'S5P_L2_O3_PR', |
| title: |
'Sentinel-5 Precursor Level 2 Ozone Profile', |
| description: |
'Retrieved ozone profiles are used to monitor the evolution of stratospheric and tropospheric ozone. Such monitoring
is important as the ozone layer protects life on Earth against harmful UV radiation. The ozone layer is recovering
from depletion due to manmade Chlorofluorocarbons (CFCs). Tropospheric ozone is toxic and it plays an important role
in tropospheric chemistry. Also, ozone is a greenhouse gas and is therefore also relevant for climate change.
The main parameters in the file are the retrieved ozone profile at 33 levels and the retrieved sub-columns of ozone
in 6 layers. In addition, the total ozone column and tropospheric ozone columns are provided. For the ozone profile,
the precision and smoothing errors, the a-priori profile and the averaging kernel are also provided.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'O3'
, 'PR'
, 'Ozone'
, 'Profile'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
101
Collection("S5P_L2_O3_TCL")
| id: |
'S5P_L2_O3_TCL', |
| title: |
'Sentinel-5 Precursor Level 2 Tropospheric Ozone', |
| description: |
'Ozone in the tropical troposphere plays various important roles. The intense UV radiation and high humidity in the
tropics stimulate the formation of the hydroxyl radical (OH) by the photolysis of ozone. OH is the most important
oxidant in the troposphere because it reacts with virtually all trace gases, such as CO, CH4 and other hydrocarbons.
The tropics are also characterized by large emissions of nitrogen oxides (NOx), carbon monoxide (CO) and
hydrocarbons, both from natural and anthropogenic sources. Ozone that is formed over regions where large amounts of
these ozone precursors are emitted, can be transported over great distances and affects areas far from the source.
The TROPOMI tropospheric ozone product is a level-2c product that represents three day averaged tropospheric ozone
columns on a 0.5° by 1° latitude-longitude grid for the tropical region between 20°N and 20°S. The TROPOMI
tropospheric ozone column product uses the TROPOMI Level-2 total OZONE and CLOUD products as input.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'O3'
, 'TCL'
, 'Tropospheric'
, 'Ozone'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
102
Collection("S5P_L2_SO2")
| id: |
'S5P_L2_SO2', |
| title: |
'Sentinel-5 Precursor Level 2 Sulphur Dioxide', |
| description: |
'Sulphur dioxide (SO2) enters the Earth's atmosphere through both natural (~30%) and anthropogenic processes (~70%).
It plays a role in chemistry on a local and global scale and its impact ranges from short term pollution to effects
on climate.
Beside the total column of SO2, enhanced levels of SO2 are flagged within the products. The recognition of enhanced
SO2 values is essential in order to detect and monitor volcanic eruptions and anthropogenic pollution sources.
Volcanic SO2 emissions may also pose a threat to aviation, along with volcanic ash.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2017-10-13 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['SENTINEL'
, 'SENTINEL5P'
, 'S5P'
, 'L2'
, 'TROPOMI'
, 'SO2'
, 'Sulphur'
, 'Dioxide'
], |
| license: |
'other', |
| providers: |
[{
'name': 'European Space Agency (ESA)'
,
'roles': ['producer'
, 'processor'
, 'licensor'
]
,
'url': 'https://earth.esa.int'
}
], |
| constellation: |
'SENTINEL5P', |
| instruments: |
['TROPOMI'
], |
| platform: |
'S5P', |
| processing:level: |
'L2', |
| eodag:sensor_type: |
'ATMOSPHERIC', |
|
|
103
Collection("S6_RADIO_OCCULTATION")
| id: |
'S6_RADIO_OCCULTATION', |
| title: |
'Radio Occultation Level 1B Products - Sentinel-6', |
| description: |
'Jason-CS/Sentinel-6 Radio Occultation Level 1B product, providing a bending
angle versus impact parameter profile, as well as other relevant
information derived from the observation.
', |
| extent: |
{
'spatial': {
'bbox': [[-180.0
, -90.0
, 180.0
, 90.0
]
]
}
,
'temporal': {
'interval': [[2021-11-19 00:00:00+00:00
, None
]
]
}
}, |
| keywords: |
['Sentinel-6'
, 'L1B'
, 'GNSS-RO'
, 'Radio'
, 'Occultation'
], |
| license: |
'other', |
| constellation: |
'Sentinel-6', |
| instruments: |
['GNSS-RO'
], |
| platform: |
'Sentinel-6', |
| processing:level: |
'L1B', |
| eodag:sensor_type: |
'Radio Occultation', |
|
|
.